Korting OKB 752 CMX - Инструкция по эксплуатации - Страница 32

Fig. 4B

Minute minder

Clock

Start of cooking

Cooking time

End of cooking

Defrosting

Turnspit

Key lock

INSTRUCTIONS FOR USE OF CONTROL DEVICES (display LCD)

SETTING THE TIME OF DAY

When the oven is first connected to the power supply, the display shows 00.00 and the led indicator

“       ” flashes. To set the desired time, turn the knob (fig. 4B) clockwise to the symbol “       ” or

anticlockwise to the symbol “       ” depending on whether you wish to increase or decrease the time.

To confirm the time set, press the knob or wait for 5 seconds.

Important

: unless this operation is performed, it will not be possible to set the oven’s cooking functions.

Note

: if you wish to set the time of day later, press the selector knob (fig. 4B) until the time indicator

 “       ” flashes and then proceed as described above.

After setting, the timer is set to operate in manual mode.

MINUTE MINDER

Press the selector (fig.4B) until the minute minder indicator “       ” flashes, then set the desired cooking

time by turning the knob clockwise to the symbol “       ” or anticlockwise to the symbol “       ” depending

on whether you wish to increase or decrease the time. To confirm the time set, press the knob or wait

for 5 seconds. The display will show the set time and the indicator “       ” will remain lit. At the end of

the set time, an acoustic signal sounds and the indicator “       ” flashes. Press the selector knob (fig.4B)

to stop the acoustic signal.

COOKING TIME

Important

: cooking time can only be set if the cooking function selector knob (fig.4) is turned to a

cooking position!

Bear in mind, furthermore, that is the cooking function selector knob is turned to “

zero

” during a cooking

programme, the entered setting will be cancelled!

Setting

: press the selector knob (fig.4B) until the symbol “       ” flashes. Set the desired cooking time

by turning the knob clockwise to the symbol “       ” or anticlockwise to the symbol “       ” depending

on whether you wish to increase or decrease the time. To confirm the set time, press the selector knob

(fig. 4B) or wait for five seconds. The display will show the symbol “       ” with the set time and the

symbol “       ” with the time at which the oven will switch off.

Start of cooking is indicated by the symbol “       ”, which lights up on the display. At the end  of the

set time the oven switches off  automatically, an acoustic signal sounds and the indicator “       ” flashes.

Press the selector  knob (fig.4B) to stop the acoustic signal and turn the function selector (fig.4) to

“

zero

” to exit cooking time setting.

32