Духовые шкафы Kaiser EG 6374 Sp - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
EN
Please read this instruction carefully before using
the appliance for the first time, to avoid the risk of
accidents and damage of the appliance.
The instruction contains important notes about
installation, safety, use and maintenance of the
appliance. The manufacturer cannot be held liable
for damage caused by non-compliance of this
instruction.
Keep this instruction in a safe place. Pass it on to
any future owner of the appliance.
SAFETY INSTRUCTIONS
TECHNICAL SAFETY
Installation of this appliance must be
performed only by a licensed electrician.
The installer is responsible for connecting
the appliance to the mains power supply in
observance
of
the
relevant
safety
recommendations.
Check the appliance for visible signs of
damage before using it. If the appliance
has been damaged in transport, do not
connect it. Never use a damaged
appliance! It could be dangerous!
Repairs should be performed by a licensed
technician only. Improper repair may result
in considerable danger to you and others. If
your appliance needs repair, contact a
Service Centre or your dealer.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
Electrical leads and cables must not be
touching the appliance.
The appliance should be connected to the
mains power supply by means of an
approved circuit breaker or fuse.
Never use multiple plug adapters or
extension leads to connect appliance to the
mains electricity supply.
The power supply of the appliance should
be turned off before repair or clean.
This appliance must not be used in a non-
stationary location (for example on a ship).
Attention!
To avoid the possibility of
electric shock, the appliance should be
powered down before replacing the lamp
.
