Духовые шкафы Kaiser EG 6374 Sp - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
16
EN
CONVERSION TO A DIFFERENT TYPE OF
GAS
Before converting the appliance for operation with
a different gas type, check which type of gas it is
currently set to operate with (adhesive label
1
on
appliance).
For the correct nozzle diameter, refer to the table
“Nozzle Table”
.
Conversion procedure:
Disconnect the electrical power supply to
the appliance,
Change the main oven nozzle:
Remove the burner cover plate (see
«Removal of the burner cover plate»),
Remove the screws securing the oven
burner
2
and with draw the burner from the
support together with the heat sensor and
the ignition spark plug,
Remove the nozzle using a 7 mm box
wrench
3
,
Screw the new nozzle in fully (diameter in
hundredths of millimetre stamped on the
nozzle), taking care not to cross the thread,
Loosen the screw
4
and adjust according
to table the opening size
a
for air supply by
rotation of the sleeve
5
,
Tighten the screw
4
,
Replace
the
burner
reversing
the
operations in step 2 above,
Replace the cover plate.
NOZZLE TABLE
TABLE OPENING SIZE
Burner
Rated
load kW
Nozzle bore in mm
G20/20
G30/29
G30/50
Oven
burner
2,50
1,18
0,77
0,65
Type of gas
Natural gas
Liquid gas
Size
a
, mm
3,0
5,0
1
2
3
4
5
Attention!
Connection to the gas supply
and converting to a different type of gas
must be carried out by qualified technicians
and in conformance with the requirements.
Depending
on
regional
rules
and
regulations, may be used different (from
mentioned) types of connections.
