Fulgor Milano FCLPO 6215 P TEM BK - Инструкция по эксплуатации - Страница 52

EN

14

10 - System Setting

With the oven on, select the icon   and confirm with the 

key 

 to enter the SETTINGS menu. This menu permits 

setting a number of parameters or special functions. It also 

permits accessing the error events list.

1. Press the keys     to select the sub menu and confirm 

with the   key.

SETUP

SERVICE

2. Use this menu to change the following settings:

  Press the keys     to select the item to be set or to 

be displayed from among the three available ones and 

confirm with the   key.

EVENT LOGS

MAIN VOLTAGE

SYSTEM

DEMO

OM 15

Event Log

The menu permits checking any recorded errors. These 

codes can be notified to the after-sales service.

01  12/11/2015  07:06  CODE: F10305

EVENT LOGS

02  17/11/2015  13:17  CODE: F10305

Demo

The purpose of this function is to set the DEMO mode, 

which makes the oven useless for cooking but automatically 

performs a demonstration of functions. 

1. Press the keys     to select the item ON.
2. Confirm with the   key.
3. Press the   key.

After about 30 seconds, the oven starts to operate in this 

mode.

To temporarily stop the DEMO function, simply keep any 

key pressed for a few seconds until the oven switches to 

standby. To start it again, press the   key.

To disable the function, enter the DEMO display page and 

set OFF. Confirm using the   key.

NOTE  Once set, the function remains enabled even if the 

oven is disconnected from the power mains. 

DEMO

ON