Fulgor Milano FCLPO 6215 P TEM BK - Инструкция по эксплуатации - Страница 44

EN

6

Connection to the electrical power mains

WARNING

This apparatus must be earthed. 

The oven is only for domestic use. 

The feed voltage and the absorbed power are as indicated 

on the data plate attached to the left-hand side upright, 

which can be seen when the oven door is open. 

Connecting must be carried out by qualified personnel and 

in accordance with the regulations currently in force. 

The manufacturer can not be held responsible for any 

damages to persons or objects caused by failure to observe 

these instructions. 

If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified persons 

in order to avoid a hazard. 

The oven must be connected to the mains through a multipole 

circuit breaker with a contact-to-contact gap of at least 3 

mm, making sure that the earth wire is not disconnected. For 

connecting use a flexible cable remembering to make it long 

enough to allow the oven to be removed from its housing 

unit when maintenance work is required.

Such a device must be fitted to the power supply in 

compliance with the regulations

governing electrical installations.

The socket or switch must be easily reachable with the oven 

fully installed.

CABLE TYPES AND MINIMAL DIAMETERS

SASO

H05RR-F

3x1,5 mm² H05RR-F

3x2,5 mm²

H05VV-F

3x1,5 mm² H05VV-F

3x2,5 mm²

H05RN-F

3x1,5 mm² H05RN-F

3x2,5 mm²

H05V2V2-F 3x1,5 mm²

H05V2V2-F 3x2,5 mm²