Electrolux EOC 66800 X - Инструкция по эксплуатации - Страница 6

Preheating

1. Set function 

 and maximum temper-

ature.

2. Run an empty oven for 45 minutes.
3. Set function 

 and maximum temper-

ature.

4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavi-
ty surface. Accessories can become more
hot than in normal use. During this period
an odour and smoke can be emitted. This
is normal. Make sure the airflow is sufficient.

DAILY USE

Warning!

 Refer to "Safety information"

chapter.

The display

1

2

3

1

Cooking function

2

Temperature

3

Time

Button

Function

Description

ON/OFF

To switch the appliance on or off.

SELECTOR

To set the oven function.

RAPID HEAT UP

To switch the rapid heat-up function on.

PYROLYTIC CLEANING

To start the Pyrolytic cleaning.

 / 

PLUS, MINUS

To adjust the values (temperature and time).

CLOCK

To set the clock function.

Touch controls

Touch controls control all the oven func-
tions. Use the touch controls to set combi-
nation of cooking function, cooking temper-
ature and automatic timing .
Make sure you touch just one control at a
time.
To set a cooking function touch and hold.

Setting the oven function

1

2

1. Touch 

 again and again until the sym-

bol for the necessary oven function
flashes.
The display shows an automatic tem-
perature. If you do not change the tem-
perature in approximately 5 seconds,
the appliance starts to operate.

2. To change the temperature, touch 

 or

 button.

If you start an oven function, the sym-
bol of the temperature   flashes.
The symbol shows that the tempera-
ture in the appliance increases.
When the appliance is at the set tem-
perature, an acoustic signal sounds
and the symbol of the temperature
stops to flash.

6 

electrolux