De Dietrich DOP7200BM - Инструкция по эксплуатации - Страница 18

12

•

5

ANOMALIES AND SOLUTIONS

•

4

CARE

REPLACING THE LIGHT BULB
(fig. F)

Warning
Make sure the appliance is

disconnected from the power before
replacing the bulb in order to avoid the
risk of electric shock. Carry out the
operation when the appliance has
cooled

.

Bulb specification:

25 W, 220-240 V~, 300°C, G9.

You can replace the bulb yourself.
Unscrew the view port and remove the
bulb (use a rubber glove, which will make
it easier to remove). Insert the new bulb
and replace the view port.

- «AS» is displayed (Auto Stop system).

This function stops heating the oven if you
forget to switch it off. Turn your oven to
STOP.

- Default code starting with «F». 

Your

oven has detected a problem.
Stop the oven for 30 minutes. If the fault is
still there, cut off the power supply for at
least one minute.
If the fault persists,  contact the Customer
Service Department.

- The oven is not heating.

Check that the

oven is correctly connected and that your
installation’s fuse is not out of service.
Check that the oven is not set to «DEMO»
mode (see settings menu).

- The oven light is not working. 

Replace

the bulb or the fuse.
Check that the oven is correctly connected.

- The cooling fan continues to operate
after the oven stops.

This is normal. It can

work for up to one hour after cooking to cool
down the oven. If it continues beyond this,
contact the Customer  Service Department. 

- The pyrolysis cleaning cycle does not
begin. 

Check that the door is locked. Call

the Customer Services Department if the
problem persists.

- The «door locking» symbol  flashes in
the display. 

Door locking fault. Contact the

Customer Services Department.