Metabo SBE 760 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original instructions

We declare under our sole responsibility: These 

impact drills, identified by type and serial number 

*1), comply with all relevant requirements of the 

directives *2) and standards *3). Technical file at *4) 

- see page 3.

The machine is suitable for drilling, without impact, 

in metal, wood, plastic and similar materials and for 

impact drilling in concrete, stone and similar mate-

rials. It is also suitable for thread tapping and for 

screwdriving (not SB 760).
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Always wear hearing protection when using 

hammer drills.

 Exposure to noise can cause loss 

of hearing.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a “live” wire may make exposed metal 

parts of the power tool “live” and could give the 

operator an electric shock.
Pull the plug out of the plug socket before any 

adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 

switch when the plug is removed from the mains 

socket or in case of a power cut.

Ensure that the spot where you wish to work is 

free of 

power cables, gas lines or water pipes

(e.g. using a metal detector).
Smaller workpieces must be secured such that they 

are not carried along with the drill bit when drilling 

(e.g. by clamping in a vice or on a work bench with 

screw clamps).

Keep hands away from the rotating tool! Remove 

chips and similar material only when the machine is 

not in operation.
Metabo S-automatic safety clutch. When the safety 

clutch responds, switch off the machine 

immediately! If the tool jams or catches, the power 

supply to the motor is restricted. Due to the strong 

force which can arise, always hold the machine with 

both hands using the handles provided, stand 

securely and concentrate.
The Metabo S-automatic safety clutch must not be 

used for torque control.
Caution must be exercised when driving screws into 

hard materials (driving screws with metric or 

imperial threads into steel)! The screw head may 

break, or a high reverse torque may build up on the 

handle.
Dust from material such as paint containing lead, 

some wood species, minerals and metal may be 

harmful. Contact with or inhalation of the dust may 

cause allergic reactions and/or respiratory diseases 

to the operator or bystanders. 

Certain kinds of dust are classified as carcinogenic 

such as oak and beech dust especially in 

conjunction with additives for wood conditioning 

(chromate, wood preservative). Material containing 

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is 

recommended.

Follow national requirements for the materials you 

want to work with.

See page 2.

1 Thumbwheel for gear selection

2 Additional handle

3 Geared chuck*

4 Keyless chuck *

5 Depth stop

6 Sliding switch for normal drilling/impact drilling

7 Speed preselection wheel *

8 Rotation selector switch

9 Locking button for continuous activation

10 Trigger switch

* depending on equipment

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview