Metabo SBE 650 Impuls - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original instructions

We, being solely responsible: Hereby declare that 

these drills/screwdrivers, identified by type and 

serial number *1), meet all relevant requirements of 

directives *2) and standards *3). Technical 

documents for *4) - see page 3.

SB 650, SBE 650, SBE 650 Impuls:

The impact drill is suitable for non-impact drilling in 

metal, wood, plastic and similar materials and 

impact drilling in concrete, stone and similar 

materials. 
B 650, BE 650:

The drill is suitable for non-impact drilling into metal, 

wood, plastic and similar materials. 
BE 650, SBE 650, SBE 650 Impuls:

The machine is suitable for thread cutting and 

screwdriving.
The user bears sole responsibility for any damage 

caused by inappropriate use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Wear ear protectors when impact drilling. 

Exposure to noise can cause hearing loss.

Use auxiliary handle(s), if supplied with the 

tool. 

Loss of control can cause personal injury.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord. 

Cutting accessory 

contacting a "live" wire may make exposed metal 

parts of the power tool "live" and could give the 

operator an electric shock. 

Pull the plug out of the plug socket before any 

adjustments or servicing are performed.
Beware of gas/water pipes and electric cables!
Avoid inadvertent starts by always unlocking the 

switch when the plug is removed from the mains 

socket or in case of a power cut.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 

machine at standstill.
Caution must be exercised when driving screws into 

hard materials (driving screws with metric or 

imperial threads into steel)! The screw head may 

break or a high reverse torque may build up.
The machine produces powerful forces when 

seizing or catching the workpiece. Always hold the 

machine firmly, adopt a steady stance and focus on 

your work.

Secure small workpieces. For example, clamp in a 

vice.

Reducing dust exposure:

Some of the dust created using this power tool 

may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 

defects or other reproductive harm. Some 

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement, 

etc.), additives for wood treatment (chromate, wood 

preservative), some types of wood (like oak and 

beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a 

well ventilated area and wear protective equipment, 

such as dust masks that are specially designed to 

filter out microscopic particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 

particles enter the environment in an uncontrolled 

manner. 
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions