BRAYER BR1003 - Инструкция по эксплуатации - Страница 5

8

9

en

en

after water starts boiling you will hear sound signals, 

the kettle will switch off automatically, the flask 

illumination (8) will go out.

•  If it is necessary to switch the kettle off, press the On/

Off button (12) «   ».

•  Long water boiling (dechlorination) mode

•  Set the kettle filled with water on the base (1).

•  Press the On/Off button (12) «   », the kettle will 

switch on, then press the long water boiling button 

(14) «   », the button (14) «   » illumination will 

light up, water will be boiling for 3 minutes, after that 

you will hear sound signals and the kettle will switch 

off automatically.

•  If it is necessary to switch the kettle off, press the On/

Off button (12) «   ».

HEATING THE WATER UP TO PRESET 

TEMPERATURE

•  You can warm up water up to the required 

temperature. For making different tea varieties the 

special water temperature is required. 

•  It is recommended to use the water temperature 

40-60 °C for baby food, 70 °C for white tea, 80 °C for 

green tea, 90-100 °C for black tea.

• 

Note:

 — heating to a preset temperature function 

is active only if the kettle filled with water is placed 

on the base (1), if you remove the kettle from the 

base (1), the settings of water heating will be reset; 

place the kettle on the base (1), set the water heating 

temperature again and switch the kettle on.

•  Press the On/Off button (11)  «-/+», you will hear a 

sound signal, the flask illumination (2) will light up, 

the water temperature in the flask (2) will be shown 

on the display (10), the button (12) «   » illumination 

will be flashing. 

•  Press one of the buttons (11) «-/+» to set a preset 

temperature of water heating 40-50-60-70-80-90 °С, 

the flashing preset temperature digital symbols will 

be shown on the display (10), in three seconds the 

water temperature in the flask (2) will be shown on 

the display (10). 

•  The water temperature in the flask (2) will be shown 

on the display (10), when water is heated up to 

preset temperature, the kettle will switch off, the flask 

illumination (2) will go out, and the On/Off button 

(12) «   » illumination will be glowing constantly. 

•  If it is necessary to switch the water heating function 

off, press the On/Off button (12) «   ».

KEEP WARM FUNCTION 
Notes: 

- the function maintains the preset water 

temperature within 2 hours without reboiling. At 

the end of this time keep warm mode switches off 

automatically.

- keep warm function is active only if the kettle filled 

with water is placed on the base (1), if you remove 

the kettle from the base (1), the keep warm 

settings will be reset; place the kettle on the base 

(1), set the water heating temperature again and 

switch the kettle on.

•  Press the On/Off button (11)  «-/+», you will hear a 

sound signal, the flask illumination (2) will light up, 

the water temperature in the flask (2) will be shown 

on the display (10), the button (12) «   » illumination 

will be flashing. 

•  Press one of the buttons (11) «-/+» to set a preset 

temperature of water warm keeping 40-50-60-70-

80-90 °С, the flashing preset temperature digital 

symbols will be shown on the display (10), in three 

seconds the water temperature in the flask (2) will be 

shown on the display (10). 

•  Press the keep warm mode button (13) «   », the 

button (13) «   » illumination will light up, you will 

hear a sound signal, when the preset temperature 

level is reached, the On/Off button (12) «   » 

illumination will be flashing.

•  If it is necessary to switch the keep warm function off, 

press the On/Off button (12) «   ».

KETTLE AUTO SWITCH OFF FUNCTION

•  If you accidentally switch the kettle on, but the water 

level appeared to be below the minimal «MIN» mark, 

the automatic thermal switch will be on and the kettle 

will switch off. In this case take the kettle from the 

base (1) and let it cool down for 10-15 minutes, then 

fill the kettle with water and switch it on, the electric 

kettle will operate in normal mode.

CLEANING AND MAINTENANCE

•  Before cleaning disconnect the kettle from the mains, 

pour out water and let the kettle cool down.

•  Wipe the base (1) and the outer surface of the flask 

(2) with a slightly damp cloth, and then wipe the 

base (1) and the flask (2) dry. Use soft detergents to 

remove dirt; do not use metal sponges and abrasive 

detergents and solvents.

•  Regularly clean mesh filter (3) from scale with a soft 

brush.

•  Do not immerse the electric kettle into water or any 

other liquids, do not wash it in the dishwasher.

•  Descaling

•  Scale, appearing inside the flask (1), influences the 

water taste and disturbs the heat exchange between 

water and the heating element.

•  To remove scale, you can use special scale-removing 

agents, as well as household ones, for example, 

vinegar or citric acid.

•  To remove scale, fill the flask (1) with water one-third 

full and boil it. Open the lid and add table vinegar (6-

9%) to the «MAX» mark, leave the liquid in the kettle 

for several hours. After the scale dissolves, pour out 

the liquid and rinse the flask (1) several times. To 

oust the smell of vinegar, boil water several times.