be quiet! TFX Power 3 - Инструкция по эксплуатации - Страница 6

Before using the power supply, allow it to warm up to room temperature for one 

hour to prevent condensation accumulating in the power supply� 

3. 

COMPATIBILITY

The be quiet! SFX Power 3 / TFX Power 3 series power supplies are compatible 

with all recent popular power supply and motherboard specifications such as:

∙

Intel SFX12V Version 3�42

  Intel TFX12V Version 2�52

∙

ATX System Design Guide Version 2�2 and Version 2�1

∙

BTX  Version 1�0a

∙

E-ATX Server Dual Motherboards via 8-pin Connector (SFX3-450W)

∙

Intel C6/C7 Status for the new processor generation

∙

Energy Star 8�0 guidelines

∙

ErP guidelines

4. 

INSTALLING YOUR NEW POWER SUPPLY

Please read „Safety instructions“ before you begin the installation�

Note

: You will need a screwdriver to fit the power supply in your PC. Only use the 

screws provided with the power supply because they have the correct thread�

Caution: 

Only use the supplied cable set� Using cables that were not included (e�g� 

cables of older power supply unit series) may lead to defects!

First remove your old power supply. To do so, proceed as follows:

∙

Carefully disconnect your PC from any power sources and unplug all cables 

connected to the PC�

∙

Open the PC case, taking care to follow the manufacturer’s instructions�

∙

Disconnect all plugs from the motherboard and all other components, such as 

FDDs, HDDs, or optical drives� Make sure that there are no plugs from the old 

power supply connected to any of the components�

∙

Now remove the screws at the rear of the power supply and carefully pull the 

power supply out of the PC case� Take special care that no cables get caught in 

the components and damage them�

Fitting your new be quiet! SFX Power 3 / TFX Power 3 power supply:

∙

Place the new power supply in the space provided in the PC case and connect 

to the rear panel using the four screws provided� Do not use excessive force�

6