Блендеры VITEK VT-3415 B/BD - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
ENGLISH
•
To avoid damaging the blades, do not pro-
cess too hard products such as cereals,
rice, spices, coffee beans, cheese and
frozen food.
•
While using the blender attachment, if
the products are difficult to process, add
some water into the bowl, if possible.
Using the whisk
Use the whisk (11) only to make cream, biscuit
dough or mixing ready desserts.
WARNING: Before assembling make sure
that the power plug is not inserted into the
power socket.
•
Insert the whisk (11) into the gear (10).
•
Attach the gear (10) to the motor unit (2),
matching the mark
on the motor unit (2) with
the mark on the gear (10) and turn it clock-
wise till bumping. The mark
should match
the mark on the gear (10) in fixed position.
•
Insert the power plug into the mains socket.
•
Put the whisk (11) into the bowl with products.
•
Set the required operation speed from 1 to 15
using the control knob (5).
•
To switch the blender on, press and hold the
button (4). Use this operation mode for mixing
liquid products.
•
If you press and hold the button (3), the unit
will operate at maximum rotation speed.
•
After you finish using the unit, take the power
plug out of the socket, take the whisk (11) out
of the gear (10) and disconnect the gear (10)
from the motor unit (2) turning it clockwise
so that the mark
on the motor unit (2) is
opposite the mark .
Attention!
•
Do not use the whisk (11) to make tight
dough.
•
Products should be put into the bowl
before the unit is switched on.
Using the mini-chopper
The mini-chopper is used to chop meat, onion,
herbs, garlic, vegetables and fruits.
Attention!
•
Do not chop very hard products, such as
nutmegs, coffee beans and cereals.
Before you start chopping:
•
Remove bones, sinews and cartilage from
meat.
•
Cut meat, onion, garlic, carrots, etc. into
approximately equal slices.
•
When chopping greens, remove stems of
herbs.
Chopping
WARNING:
–
Before assembling the chopper make
sure that the power plug is not inserted
into the mains socket.
Caution:
–
The chopping knife (8) is very sharp!
Always hold the chopping knife (8) only by
the plastic end.
•
Set the chopping knife (8) on the axis of chop-
per bowl (7).
•
Put the food into the chopper bowl (7).
•
Place the geared lid (9) on the chopper bowl
(7) and rotate the geared lid (9) clockwise until
bumping.
•
Attach the motor unit (2) to the geared lid (9),
matching the mark
on the motor unit (2)
with the mark on the geared lid (9) and turn
it clockwise till bumping. The mark
should
match the mark on the geared lid (9) in fixed
position.
•
Set the required operation speed from 1 to 15
using the control knob (5).
•
To switch the blender on, press and hold the
button (4).
•
When the button (3) is pressed, the unit oper-
ates at maximal rotation speed.
•
During operation hold the motor unit (2) with
one hand and the chopper bowl (7) with the
other hand.
•
After you finish using the chopper, detach the
motor unit (2) from the geared lid (9) by turn-
ing it counterclockwise so that the mark
on the motor unit (2) is opposite the mark .
•
Remove the geared lid (9) by rotating it clock-
wise.
•
Carefully remove the chopping knife (8) taking
it by the plastic end.
•
Take the chopped products out of the chop-
per bowl (7).
Attention! Follow the described sequence of
operations strictly.
Cleaning
Attention! The blades of the chopping knife
(8) are very sharp and dangerous. Handle
the chopping knife (8) very carefully!
VT-3415.indd 5
15.12.2017 9:40:19
