VITEK VT-1469 W - Инструкция по эксплуатации - Страница 5

Блендеры VITEK VT-1469 W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 50
Загружаем инструкцию
background image

5

ENGLISH          

THE  UNIT  IS  INTENDED  FOR  HOUSEHOLD 
USAGE ONLY

BEFORE USING THE UNIT
Note: 

– 

In  case  of  unit  transportation  or  storage  at 
low  temperature  it  is  necessary  to  keep  it 
for  at  least  two  hours  at  room  temperature 
before switching on.

– 

Before  using  the  unit,  wash  the  chopping 
knife  (8),  the  chopper  bowl  (9),  the  whisk 
(11)  and  the  measuring  cup  (12)  with  warm 
water and a neutral detergent, then rinse and 
dry them. 

– 

Do  not  immerse  blender  attachment  (1)  and 
mash  making  attachment  (14)  into  water 
entirely, wash them under water jet, provided 
that no water gets inside the attachment.

– 

Wipe the motor unit (2), geared lid (7), whisk 
gear (10) and mash making attachment gear 
(13) with a soft slightly damp cloth.

Attention! 

Do not immerse the motor unit (2), geared 
lid  (7),  whisk  gear  (10),  mash  making 
attachment  gear  (13),  power  cord  and 
power plug into water or any other liquids.

Do  not  put  the  attachments  and  bowl  in  a 
dish washing machine.

Selection of attachment rotation speed

– 

Change the attachment rotation speed using 
the speed control (5). Press and hold “I” but-
ton (4), select the the required rotation speed 
by turning the speed control (5). 

– 

For  operation  at  the  maximal  rotation  speed, 
press and hold the (3) “II” button. 

Continuous operation time

Continuous  operation  time  of  attachments  (1, 
11, 14) should not exceed 1 minute. Continuous 
operation  time  of  mini-chopper  (9)  should  not 
exceed  20-30  seconds.  Make  at  least  a  two-
minute interval between operation cycles.

 

USING THE BLENDER ATTACHMENT (pic. 1).

WARNING: 

– 

Before assembling make sure that the power 
plug is not inserted into the socket.

– 

To  install  the  blender  attachment  (1)  press 
the  attachment  lock  buttons  (6)  simultane-
ously  and  insert  the  blender  attachment  (1) 
into  the    motor  unit  (2)  then  release  the  lock 

buttons  (6)  and  make  sure  that  the  attach-
ment is firmly locked. 

– 

Insert the plug into the socket.

– 

Immerse the blender attachment (1) into the 
bowl  with  products,  that  you  want  to  chop/
mix;  you  can  use  the  measuring  cup  (12) 
for it.

– 

Select  the  required  attachment  rotation 
speed by pressing and holding button «I» (4) 
or «II» (3).

Note: 

– 

Food  products  should  be  put  into  the  bowl 
before switching the unit on. 

– 

Before starting to chop/mix, we recommend 
to  peel  fruit,  remove  inedible  parts,  such  as 
kernels, and cut fruit into 2х2 cm cubes.

– 

After  you  finish  using  the  unit,  take  the  plug 
out  of  the  socket  and  remove  the  attach-
ment  (1)  by  pressing  the  buttons  (6)  simul-
taneously.

Attention! 

– 

Do  not  remove  the  blender  attachment  (1) 
during blender operation.

– 

To  avoid  damage  of  blades,  do  not  process 
too hard products such as cereals, rice, spic-
es, coffee beans, ice, cheese, frozen food. 

– 

If  the  products  are  difficult  to  process  add 
some water. 

USING THE WHISK (pic. 2).

Use  the  whisk  attachment  (11)  only  to  make 
cream, biscuit dough or mixing ready desserts.

WARNING:

– 

Before assembling make sure that the power 
plug is not inserted into the socket.

– 

Insert the whisk (11) into the gear (10).

– 

Press the attachment lock buttons (6) simul-
taneously  and  insert  the  whisk  gear  (10)  into 
the  motor  unit  (2),  release  the  lock  buttons 
(6), make sure that the gear is firmly locked. 

– 

Insert the plug into the socket.

– 

Put the whisk (11) into the bowl with products.

– 

Select  the  required  whisk  rotation  speed  by 
pressing and holding button «I» (4) or «II» (3).

– 

After  you  finish  using  the  unit,  take  the  plug 
out  of  the  socket,  disconnect  the  whisk  (11) 
from  the  gear  (10)  and  remove  the  gear  (10) 
from  the  motor  unit  (2)  by  pressing  buttons 
(6) simultaneously. 

Attention!

– 

Do  not  use  the  whisk  (11)  to  make  tight 
dough.

VT-1469.indd   5

15.08.2012   12:50:42

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1469 W?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"