Oursson BL0643T/GA - Инструкция по эксплуатации - Страница 6

10

11

EN

sons (including children) with reduced physi

-

cal, sensory or mental capabilities, or lack of 

experience and knowledge. They can only use 

the device under the supervision of the person 

responsible for their safety, or after instruc

-

tion on the safe use of the device. Do not allow 

children to play with the product.

• 

This product is intended only for use in the 

home.

•  If the power cord is damaged, it must be 

replaced by a specialist from the authorized 

service center ( ASC ) OURSSON AG to avoid 

danger.

• 

Use only the tools, which are included in the 

product set.

•  When cleaning the appliance do not use abra

-

sives and organic cleaners (alcohol, gasoline, 

etc.). When cleaning the device it is allowed to 

use a small amount of neutral detergent. 

When using electrical appliances should take the 

following precautions:

• 

Use the device according to the following in-

structions manual.

•  Install the device on a stable surface.

• 

Use only the tools, which are included in the 

product set.

• 

To protect against risk of electrical shock do 

not put the cord in water or other liquid. If 

for some reason the water got into the unit, 

contact an authorized service center (ASC) 

OURSSON AG.

• 

For power supply, use a power grid with proper 

characteristics.

• 

Do not use the device in areas where the air can 

contain vapors of flammable substances.

•  Never attempt to open the device by 

yourself – it could possibly be the reason 

of an electrical shock can lead to product 

malfunction and will invalidate the manu-

facturer’s warranty. For repair and main

-

tenance, contact only authorized service 

centers meant for repair of products under 

the trademark OURSSON.

•  When moved from a cool to a warm place and 

vice versa unpack it before use and wait 1-2 

hours without turning it on.

• 

In order to prevent electrical shock do not 

immerse the entire product or the wires into 

the water.

• 

Be particularly careful and cautious when using 

the device near children.

• 

Do not touch any hot parts, as this may cause 

injury.

• 

The power cord is specially made relatively 

short in order to avoid the risk of injury.

• 

Do not allow the cord to hang over the sharp 

edge of the table or touch hot surfaces.

• 

Do not connect this device to a grid which is 

overloaded with other appliances: it can lead to 

the fact that the device will not function properly.

• 

Do not install the device near gas and electric 

stoves and ovens.

• 

After use, make sure to disconnect the device 

from the power grid.

•  Keep the device from bumps, falls, vibration and 

other mechanical influences.

• 

Make sure to disconnect the device from the 

power grid before cleaning or changing acces

-

sories.

•  Do not use the device outdoors.

•  This appliance is not intended for use by per

-

Danger symbol 

A reminder to user about high voltage.

Warning symbol 

A reminder to user about the necessity of operating exactly according to the 

instructions. 

PRODUcT SET

Measuring cup

 ...................................................1 pc.

Lid

 ......................................................................1 pc.

Blender’s jar

 ......................................................1 pc.

Mill (BL0642G)...................................................1 pc.

Blades

................................................................1 pc.

Coupling

 ............................................................1 pc.

Motor unit

...........................................................1 pc.

Instruction manual

 .............................................1 pc.

Do not apply physical force to the device, 

as this may damage the device due to the 

user’s fault.

SAFETY INSTRUcTIONS, 

Fig. A

REcOMMENDATIONS   

•  Please read the instruction manual before using 

the device. Keep the manual after reading for 

further use.

• 

All illustrations in this manual are schematic 

representations of real objects, which may differ 

from the actual images.

• 

Do not grind very hard ingredients to avoid 

blunting of the blades.

The device is equipped with a safety lock. If the 

blender’s  jar  and  lid  are  not  installed  correctly, 

you won’t be able to turn on the device.

UTILIZATION, 

F

ig.

 C

control panel

Rotary knob – use for following functions:

* Switching the device 

ON/OFF

* сhanging the speed level from 1 up to 7, where 1 – 

minimal speed, and 7 – maximal. 

 – use this button to turn on turbo mode

 – use this button to turn on smoothies mode

  – use this button for ice crushing 



  – ON indicator



  – OFF indicator

Before first use,

make one preparation cycle 

without ingredients,

 add water into the jar. After 

that, wipe the body of the device with a dry soft 

cloth. Wash the jar, lid, mill, stainless steel blades 

with 

warm water

 with detergents. 

Before assembling and disassembling the de-

vice, make sure it is unplugged.

ELEMENTS OF DESIGN, 

Fig. B

Measuring cup

Lid

Blender’s jar

Blades

Coupling

Motor unit

Rotary switch with buttons

Mill (BL0642G)

Utilizing the jar: 

1. Place the jar onto the motor unit according to the 

manual. 

2. Add ingredients. 

Do not fill the jar above the 

max. mark. 

3. Plug in the device.

4. Select the required speed, using the knob, from 

1 to 7, turning it clockwise. The Mix/Grid process 

will start automatically.

Utilizing the mill: 

1. The mill is design to grind coffee beans, rice, 

wheat, peeled nuts, pepper, sesame seeds, dried 

beans, hard cheese, and breadcrumbs. 

NOTE:

 Always grind cloves, star anise and aniseed 

together with other ingredients.

The blades are very sharp, be careful. 

Before placing the jar, make sure that the 

knob is in the     position.  

Maximum time of continues use of the blender 

is 2 minutes, after that you need to turn off the 

device for 3 minutes.

The mill is not designed to grind very hard in-

gredients  like  nutmeg  or  ice  cubes.  Do  not  fill 

the mill’s cup higher that the max mark.

5. You may also turn on the blender by holding the 

button  . In this case, the device will be working 

at maximum speed all the time. The speed won’t 

change even if you will change the switch’s posi-

tion. To turn off the device, release the button.

6. 

To prepare smoothie press 

 button. To stop, 

press the button again.

7. 

For ice crushing, press 

 button. To stop, press 

it again.

NOTE: 

To get ice crumb, select the maximum 

speed level, or hold 

 button for a few seconds. If 

the pieces are still big, repeat the operation. 

8. To finish working with blender, turn the knob to  

 position. Unplug the device.

9. After that you can disassemble the device. 

You can open the lid only when the jar is 

removed. 

2. Open the mill and put necessary ingredients. 

Close the jar.

3. Place the mill onto the electric motor as shown on 

the picture.

4. Plug in the device.

5. Turn on the blender, hold the fast mix button 

.

To turn of the device relies the button. 

GRINDING REcOMMENDATIONS 

Before  grinding,  it  is  recommended  to  chop  ingredients  on  2×2×2  cm  pieces.  Max  amount  of  ingredients  is 

shown in the table. Follow the recommendations in the recipe book. 

Operation

Note

Smoothies and milk-

shakes

1500 ml

—

60 sec.

To turn of the device press 

 button again.

Puree from fresh 

fruit, berries and 

vegetables 

1500 ml

—

MAX (5-7) 30-45 

sec.

The ingredients must be soft or juicy (ba

-

nanas, strawberries, cucumbers, etc.)

Puree from cooked 

fruits, vegetables and 

soups

750 ml

—

MAX(5-7)

30-45 

sec.

Do not puree ingredients with a temperature 

higher than 95 

o

C