Блендеры BRAYER BR1246 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
EN
unit is fixed properly. Install the motor unit evenly in
vertical position (pic. 5).
• Insert the pusher (9) into the lid (10) opening.
• Insert the power plug into the mains socket.
• To switch the unit on, press and hold down the button
(4) « ».
• When you press and hold the button (4) « » you can
control the disc (15 or 16) rotation speed by turning
the control knob (5).
• For operation at the maximal rotation speed, press
and hold down the button (3) «T».
• During the operation put the products into the pusher
opening and use the pusher (9) to feed products.
Press the pusher (9) gently while feeding products.
Never push products with your hands or other
objects, use the pusher (9) only.
•
Watch the filling of the bowl (13), as it fills, switch the
blender off and remove the food from the bowl (13).
•
Release the button (3 or 4) to switch off.
• After using the unit, wait until the discs (15 or 16)
fully stop.
• Remove the power plug from the mains socket.
• Disconnect the motor unit from the lid (10) by
pressing the locks (2) (pic. 5).
• Remove the lid (10) from the bowl (13) by turning the
lid (10) counterclockwise.
• Remove the installed disc (15 or 16) from the driving
shaft (17), take out the driving shaft (17).
• Take the chopped products out of the bowl (13).
install the pusher (9) back to its place.
• After the unit operation, wait till the chopping knife
(14) completely stops rotating.
• Remove the power plug from the mains socket.
• Disconnect the motor unit from the lid (10) by
pressing the release buttons (2) (pic. 4).
• Remove the geared lid (8) from the bowl (10).
• Carefully remove the chopping knife (14) from the
bowl (13) holding it by the plastic end.
• Take the chopped products out of the bowl (13).
USING THE GRATING OR SHREDDING DISC
Continuous operation time while using the grating
(15) or shredding (16) disc should not exceed
3 cycles of 10 seconds each. Make at least a 3
minutes break between the operation cycles.
• The discs (15 and 16) are used for chopping
vegetables or fruit.
• Before assembling make sure that the power plug is
not inserted into the mains socket.
•
Place the bowl (13) on a flat and steady surface.
• Install the driving shaft (17) on the axis inside the
bowl (13).
• Install the grating disc (15) or the shredding disc (16)
on the driving shaft (17).
• Place the lid (10) on the bowl (13) and turn it
clockwise as far as it will go.
• Press on the locks (2) and install the motor unit on
the lid (10) feeding chute, make sure that the motor
