Блендеры BRAYER BR1246 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
EN
• Wash the lower part of the attachment (8), wipe the
outer part of the attachment (8) body with a damp
cloth. Do not immerse the attachment (8) into water
or other liquids.
USING THE CHOPPER
Continuous operation time while using the
chopping attachment should not exceed 3 cycles
of 10 seconds each. Make at least 3 minutes break
between the operation cycles.
• The attachment is used to chop meat, cheese, onion,
herbs, garlic, carrots, walnuts, prunes, vegetables
or fruit.
ATTENTION!
The blades of chopping knife (14) are
very sharp! Always hold the chopping knife (14) by the
plastic end.
ATTENTION!
Do not chop very hard products, such
as nutmegs, coffee beans, cereals, frozen food or ice.
PREPARING THE FOOD BEFORE CHOPPING:
• Remove bones, veins, cartilage and fat from meat.
• Cut meat, cheese, onions, vegetables or fruit into
pieces approximately 60x20x20 mm in size.
• Remove stems of herbs, shell nuts.
CHOPPING
Before assembling the chopper, make sure that the
power plug is not inserted into the mains socket.
•
Place the bowl (13) on a flat and steady surface.
• Install the chopping knife (14) on the axis inside the
bowl (13).
• Put the products into the bowl (13).
Note:
— do not switch the unit on when the bowl (13)
is empty.
• Install the geared lid (8) on the bowl (10).
• Place the lid (10) on the bowl (13) and turn it
clockwise as far as it will go.
• Install the motor unit on the geared lid (8) feeding
chute, make sure that the motor unit is fixed properly.
Install the motor unit evenly in vertical position (fig.
4).
• Insert the pusher (9) into the lid (10) opening.
• Insert the power plug into the mains socket.
• To switch the unit on, press and hold down the button
(4) « ».
• When you press and hold the button (4) « » you
can control the chopping knife (14) rotation speed by
turning the control knob (5).
• For operation at the maximal rotation speed, press
and hold down the button (3) «T».
• During the unit operation hold the motor unit with one
hand and the bowl (13) with the other hand.
•
Release the button (3 or 4) to switch off.
• If necessary, you can add additional products to
the bowl (13) for chopping, remove the pusher (9)
through the pusher (9) opening, add the products and
