BRAYER BR1244 - Инструкция по эксплуатации - Страница 5

8

9

en

en

PRePARInG THe FOOD BeFORe CHOPPInG:

• 

Remove bones, veins, cartilage and fat from meat.

• 

Cut meat, cheese, onions, vegetables or fruit into 

pieces approximately 60x20x20 mm in size. Maximal 

weight of the meat should not exceed 200 g.

• 

Remove stems of herbs, shell nuts.

CHOPPInG

Before assembling the chopper, make sure that the 

power plug is not inserted into the mains socket.

•  Place the chopper bowl (9) on a flat and steady 

surface.

• 

Install the chopping knife (10) on the axis inside the 

bowl (9).

• 

Insert the power plug into the mains socket.

• 

To switch the unit on, press and hold down the button 

(4) .

• 

When you press and hold the button (4)  you can 

control the chopping knife (10) rotation speed by 

turning the control knob (5).

• 

For operation at the maximal rotation speed, press 

and hold down the button (3) «TURBO».

• 

during the unit operation hold the motor unit (2) with 

one hand and the chopper bowl (9) with the other 

hand.

• 

Release the button (3 or 4) to switch off.

• 

After the unit operation, wait till the chopping

• 

knife (10) completely stops rotating.

• 

Remove the power plug from the mains socket.

• 

disconnect the motor unit (2) from the geared lid (8) 

by turning the motor unit (2) counterclockwise.

• 

Remove the geared lid (8) from the bowl (9).

• 

Carefully remove the chopping knife (10) from the 

bowl (9) holding it by the plastic end.

• 

Take the chopped products out of the bowl (9).

USInG THe WHISK ATTACHMenT

• 

Continuous operation time should not exceed 1 

minute while using the whisk attachment (7). Make at 

least a 3­minute break between operation cycles.

ATTenTIOn!

do not use the whisk attachment (7) to knead tight 

dough.

• 

Use the whisk attachment (7) only for beating egg 

whites, making biscuit dough or for mixing ready 

desserts.

Before installing the whisk attachment (7), make 

sure that the power plug is not inserted into the 

mains socket.

• 

Insert the whisk attachment (7) into the whisk gear 

(6).

• 

Insert the whisk gear (6) into the motor unit (2) and 

turn it counterclockwise, make sure that the gear (6) 

and the whisk (7) are fixed properly (fig. 3).

• 

Insert the power plug into the mains socket.

• 

Immerse the whisk attachment (7) into a suitable 

bowl with food. You can put the foodstuffs into the 

cup (11).

• 

To switch the unit on, press and hold down the button 

(4) .

• 

When you press and hold the button (4)  you can 

control the attachment rotation speed 

• 

by turning the control knob (5).

• 

For operation at the maximal rotation speed, press 

and hold down the button (3) «TURBO».

• 

Release the button (3 or 4) to switch off.

•  After you finish using the unit, disconnect the power 

plug from the mains socket, disconnect the whisk 

gear (6) from the motor unit (2) by turning the gear 

(6) clockwise.

• 

Remove the whisk attachment (7) from the gear (6).

POTATO MASH MAKInG ATTACHMenT

Continuous operation time should not exceed 

1 minute while using the potato mash making 

attachment (12). Make at least a 3-minute break 

between operation cycles.

• 

Before installing the attachment (12), make sure that 

the power plug is not inserted into the mains socket.

• 

Insert the attachment (12) into the motor unit (2), and 

turn it counterclockwise as far as it will go, make sure 

that the attachment (12) is fixed properly.

• 

Insert the power plug into the mains socket.

• 

Immerse the attachment (12) into the bowl with 

boiled potatoes.

• 

To switch the unit on, press and hold down the button 

(4).

• 

When you press and hold the button (4), you can 

control the attachment rotation speed by turning the 

control knob (5). 

• 

For operation at the maximal rotation speed, press 

and hold down the button (3) «TURBO».

• 

When you make potato mash, add warm milk or 

some potato pot liquor.

•  After you finish the unit operation, take the power 

plug out of the mains socket and remove the 

attachment (12), turning it clockwise.

• 

Wash the lower part of the attachment (12), wipe the 

outer part of the attachment (12) body with a damp 

cloth. do not immerse the attachment (12) into water 

or other liquids.

ATTenTIOn!

The blades of chopping knife (10) are very sharp! 

Always hold the chopping knife (10) by the plastic 

end.

• 

Put the products into the bowl (9).

• 

note:

 — do not switch the unit on when the bowl (9) 

is empty.

• 

Install the geared lid (8) on the bowl (9).

• 

Install the motor unit (2) on the geared lid (8) feeding 

chute, turn the motor unit (2) clockwise until bumping, 

make sure that the motor unit (2) is fixed properly. 

Install the motor unit (2) evenly in vertical position 

(fig. 2).