АТС Panasonic KX-TD500 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
System
Programming Guide
73
Parameter
Released Link Operation
Default
Disable
Value Range
1.
Enable
2.
Disable
Description/Function
Used to turn on / off "Released Link Operation" mode of the
extension. When Released Link Operation is enabled, an extension
user will be automatically released from a call (extension, outside)
after transferring it to the destination, if the destination extension is
idle. This feature simplifies the transfer operation by eliminating
the need for going on-hook or pressing the RELEASE button after
transferring the call.
This feature is convenient for extension users, such as Operators,
who handle a large volume of calls.
Reference
• 1.3 System Features (F/G)
– Released Link Operation
• 2.4.3 Transferring a Call (U/M)
Parameter
Digits Restriction in CO Talk Mode
Default
Unrestricted
Value Range
1.
Unrestricted
2.
1-15: the digits to be dialled out.
Description/Function
Specifies the maximum number of digits that can be dialled during
a CO call.
If the outside party hangs up during a CO call and the extension
user tries to dial out while still on the same CO line, the system will
disconnect the line at the instant the assigned number of digits are
dialled.
Note
•
This programme can be added if the CPC Signal Detection is
not provided by the Central Office.
Reference
• 1.3 System Features (F/G)
– Calling Party Control (CPC) Signal Detection
