АТС Panasonic KX-TD500 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Programming Error Messages
348
Programming Guide
E4024
DN or FDN must be entered to assign the type of key.
You must enter the DN or FDN when you assign key type "DSS," "Phantom," "SDN,"
"VTR," "2WAY-REC" and "2WAY-TRN." Each key needs following directory number
as DN or FDN:
- DSS
Extension directory number which is in existence.
- Phantom
Floating directory number which is registered in "5-2 Phantom Extension" screen.
- SDN
Primary directory number (PDN) of the DN mode extension.
- VTR, 2WAY-REC / TRN
Extension directory number which is assigned as VPS.
E4025
PHANTOM key duplicated.
Two phantom keys cannot have the same phantom FDN.
E4026
Please enter CO key number assigned to S-CO, G-CO, L-CO or SDN key.
The CO key number which is assigned to Single-CO, Group-CO, Loop-CO or SDN
key should be entered when "Prime Line - CO" is specified in "[Preferred Line]
Outgoing / Incoming" programming.
E4027
Doorphone destination duplicated.
Doorphone destinations (extensions) must be unique for Day mode settings and Night
mode settings. However, an extension used for Day can be used for Night.
E4028
Converted digits exceed the limit.
Total number of converted digits should be less than 16 digits.
Please change 'Digits to delete,' and/or 'Number to be added.'
E4029
Invalid directory number for G-LOGIN / LOGOUT key.
Only FDN of an Incoming Group can be assigned as the number of G-LOGIN /
LOGOUT key.
E4030
Invalid directory number for G-FWD key.
Only FDN of an Incoming Group can be assigned as the number of G-FWD key.
E5001
Assign both 'name' and 'number' for Caller ID.
Cannot assign just the name for Caller ID.
E5002
Cannot use more than seven % characters.
There can be a maximum of seven % characters in an absent message.
E5003
User code format error.
Please assign the DISA / TIE user code of 4–10 digits consisting of 0–9.
E5004
User code duplicated.
Each code in the DISA / TIE User Code must have a unique number.
E5005
Cannot set 'RET' command at the head.
Please set the command except for "RET" at the head of UCD Time Table.
Error Code
Error Message
Description
