Акустика Sven SPS-750 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
•
Plug the MSS in a mains socket.
•
Switch on the MSS by shifting the POWER switch
j
into the ON position on the active speaker
rear panel. Then switch on an audio signal source.
•
Select a desired signal source by pressing short the button INPUT
d
on the control panel or
buttons BT
c
, AUX 1
c
, AUX 2
d
, OPT
j
on the remote control (RC), after that the LED of the
selected input will illuminate on the control panel.
•
Adjust the volume level with button VOL+/-
e
on the speaker control panel or with buttons
VOL+/-
e
on the remote control (see Fig. 4).
•
Adjust the treble and bass levels with buttons
e
on the speaker control panel or with buttons
TREBLE
h
and BASS
g
on the remote control .
•
After using the MSS, mind to switch it off with the ON/OFF switch
k
(OFF position) and unplug
the
power cable from the mains socket.
•
To connect the MSS to a PC, MP3/CD players, first plug the RCA jacks of the 2RCA to mini-jack
Ø 3.5 mm signal cable (included) in the РС audio input
f
of the active speaker, then plug the
minijack of the signal cable to the LINE OUT port of the computer sound card or to the audio
OUTPUT of MP3/CD player terminals (see connection diagram in Fig. 5).
Note
. Sound quality is directly affected by correctness and reliability of the connection of
cables. It is recommended that cables included into the package contents of the MSS be
used.
POWER
ON
OFF
OPTICAL
AUX2
AUX1
Power
cable
2RCA to mini-jack
signal cable
Fig. 5. Audio sources connection diagram
Audio cable
ENG
20
2.0 Multimedia Speaker
System
with Bluetooth
CD
PC
Player
Mobile devices
PC
