Sven MS-1090 - Инструкция по эксплуатации - Страница 23

• 

To select a track, use the remote control numeric pad 

f

 to enter its number, or press buttons 

d

and 

c

 on the remote control or buttons 

b

 and 

c

 on the front panel. 

• 

Using the

REPEAT button 

h

 on the front panel, you can repeat the current track or all tracks (if 

the button is pressed once or twice respectively).

• 

In the Player mode, Equalizer feature is available. To select a preset mode, use the EQ button 

i

on the remote control or the EQ button 

f

 on the front panel.

Notes:

• If the MSS is left unused for a long period of time, please mind to switch it off by shifting 

the POWER  switch 

m

 on the rear panel into the Off position and unplug the power cord.

• To improve the sound quality, use the Line Out port of your sound card.

• Due to the constant development of the software, the actual MSS operation may differ 

from that described in this manual. The most recent version of the manual is available at  

www.sven.

fi

. 

If none of the above methods can solve the problem, please seek professional advice at your nearest 

service center. Never attempt to repair the product yourself.

Problem

The MSS does not 

turn on.

No sound or the 

sound is too quiet.

Distortion of sound.

The remote control 

is not working.

Cause

The MSS isn’t connected to a mains 

outlet.
The power switch is o

ff

.

Volume level is set at minimum value.
Improperly connected audio source.
Large amplitude of the input signal.

The battery is discharged.

Solution

Check the connection.

Turn on the switch.
Adjust the volume control knob.
Connect the audio sources correctly.
Turn down the source volume and

the MSS volume.
Replace the battery with a new one.

6. TROUBLESHOOTING

ENG

22                           

2.1 Multimedia Speaker System