Акустика Sven MS-1090 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
USB/SD card
connection
•
To connect the MSS to a DVD player or TV, use a 2RCA to 2RCA stereo signal cable (not included).
Insert the RCA jacks of the cable into the AUDIO INPUT jack
k
, and connect the other RCA jacks to
the audio output jack of your DVD/CD player.
Note.
The
sound is directly dependent on accuracy and reliability of the cable connections.
It’s recommended that you use the cables supplied with the speakers.
•
Insert the power cord plug
n
(see Fig. 2) on the subwoofer rear panel into the mains outlet.
•
Set the subwoofer volume to the minimum by turning the BASS +/- knob
j
on the subwoofer rear
panel counterclockwise until it stops.
•
Switch on the device using the POWER switch (
m
, ON position) on the subwoofer rear panel.
•
Select an audio source
(AUDIO INPUT or USB/SD) with the MODE button
d
on the subwoofer front
panel or the MODE button
j
on the remote control.
•
Adjust the volume level by turning the BASS +/- knob
j
on the subwoofer rear panel, and then –
using buttons VOL+
b
or VOL-
c
on the subwoofer front panel or buttons -/+
e
on the remote
control (Fig. 4).
•
The MUTE function is designed for switching on/o
ff
the sound of the MSS. To switch the sound
on, press the MUTE button
g
(Fig. 4) on the remote control again.
Player mode
•
To switch to the Player mode, insert a USB or SD storage device into the corresponding port
(USB
p
or SD CARD
o
) (Fig. 3) when the MSS is on. Then press the MODE button
d
on the front
panel or the MODE button
j
on the remote control. The playback will start automatically. The LED
g
on the front panel will blink green.
•
To select the AUDIO INPUT, press the MODE button
j
on the remote control or the MODE button
d
on the front panel. The LED
g
will light up red.
Fig. 5. Connection diagram
2RCA to mini-jack
signal cable
PC
Player
or
2RCA to 2RCA
signal cable
SD
CD
DVD
ENG
21
Operation Manual
MS-1090
