Акустика Sven HT-200 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
33
Operation Manual
Notes:
• If the USB port and SD card ports are used simultaneously, you can select the necessary
source by successively pressing the INPUT
b
button on the subwoofer front panel or button
a
on the RC.
Master volume control
•
Adjust the desired master volume level with buttons VOL-
c
or VOL+
f
on the control panel or
use buttons VOL+/- and
x
on the RC.
Subwoofer and satellite speaker volume control
•
The bass and treble level can be adjusted with BASS +/–
ǜ
TREBLE +/–
m
buttons respectively
on the RC.
•
The front, rear and center speaker volume can be adjusted with FL +/–
h
, FR +/–
v
, SL +/–
j
,
SR +/–
y
and CEN +/–
w
buttons on the RC. The SW +/–
i
buttons on the RC are used for
adjusting the subwoofer volume control.
Switching off the sound
•
Press the button
f
on the RC or ST.BY
e
button on the subwoofer control panel to switch o
Ԛ
the
sound. Press these buttons again to switch the sound on.
PC/AUX/DVD Modes
•
To select any of PC, AUX or DVD modes use the INPUT
b
button on the front panel or PC
b
, AUX
p
or DVD
r
buttons on the RC, when the HTSS is on (Fig. 4). The corresponding title will be displayed
on the subwoofer and “PC”, “AUX” or “DVD” LED indicators will illuminate.
2.1/5.1 Mode
•
For 5.1 mode emulation from 2.1 mode use the 2.1/5.1
d
button on the front panel or 2.1/5.1
q
button on the RC. The corresponding title will be displayed on the subwoofer and the “2.1/5.1” LED
indicator will illuminate.
Player Mode
•
To enter the Player mode press the INPUT
b
or USB/SD
a
button on the RC, when the HTSS is
on. The LED display will show the selected mode for a short moment, then the number of the tracks
found and the number of the track played, and then the playback time elapsed. The Plaer mode will
start automatically. The playing device symbol will be displayed as well.
•
To select a track, you can enter directly its sequence number on the remote control or select it
using buttons or on the front panel or on the RC. The display will show the track number for
a short moment, and then the playback time elapsed.
•
You can select the playback mode using the REPEAT
l
button on the remote control (”ONE” –
repeat the playing track; “RND” – play random tracks; “ALL” – play all tracks available).
Tuner Mode
•
To switch to the FM mode, use the INPUT
b
button on the subwoofer front panel or the FM
n
buttons on the remote control. The FM indicator will illuminate on the control panel.
•
To auto scan and memorize the found stations, press short the button on the front panel or the
AUTO
f
button on the remote control. To stop auto scanning, press this button again before the
scanning is over. The frequency being scanned is displayed on the front panel and when the station
is being memorized its assigned sequence number is displayed for a short moment.
•
For manual scanning use buttons TUNE– (down the frequency range) and TUNE+ (up the frequency
range). To save the selected station, press the SAVE
u
button, and then with the buttons
assign the station its number and press the SAVE button again. When the station has been
memorized, the “Good” message will be displayed.
27
HT-200
