Einhell GE-CS 18 Li - Инструкция по эксплуатации - Страница 21

GB

- 21 -

4. Technical data

 Motor power supply:  ............................... 18 V DC
Idle speed n

0

:  ...................................... 6500 min

-1

Battery charger output voltage:  .............. 21 V DC
Battery charger output current:  ....................... 3 A
Charging unit 

supply voltage:  .................... 200-250V~ 50-60Hz
Battery type:  ............................................... Li-Ion
Adjustment angle:  ............ 35° to the left and right
Grinding wheel Ø (inside):  ........................ 23 mm
Grinding wheel Ø (outside):  ........... max. 108 mm
Grinding wheel thickness:  ....................... 3.2 mm
Weight:  .......................................................1,7 kg

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 61029.

L

pA

 sound pressure level  ..................... 54,1 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   ....................... 67,1 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 61029.

 Grinding

Vibration emission value a

h

 < 2.5 m/s

2

K uncertainty = 1.5 m/s

2

The speci

fi

 ed vibration value was established in 

accordance with a standardized testing method. It 

may change according to how the electric equip-

ment is used and may exceed the speci

fi

 ed value 

in exceptional circumstances.

The speci

fi

 ed vibration value can be used to 

compare the equipment with other electric power 

tools.

The speci

fi

 ed vibration value can be used for initi-

al assessment of a harmful e

ff

 ect.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

5.  Before starting the equipment

Warning!

Always remove the battery pack before making 

adjustments to the equipment.

5.1  Assembly (Fig. 3-6)

• 

 Place the chain clamping mechanism in the 

chuck (Fig. 3) and screw from underneath 

using the star screw (Fig. 4)

• 

 Before starting the chain sharpener, fasten 

it securely to a suitable surface (e.g. a work-

bench) at a suitable place (protected against 

dust, dry, well-lit) using M8 fixing screws and 

washers (Fig. 5)

• 

 Make sure when doing so that the mounting 

plate of the chain sharpener is pushed onto 

the surface as far as it will go (Fig. 6)

5.2 Charging the Li battery pack (Fig. 17-18)

The battery is protected from exhaustive dischar-

ge. An integrated protective circuit automatically 

switches o

ff

  the equipment when the battery is 

fl

 at.

Warning! 

Do not actuate the On/O

ff

  switch any 

more if the protective circuit has tripped. This may 

damage the battery.

1.  Remove the battery pack from the handle, 

pressing the pushlock button (13) downwards 

to do so.

Anl_GE_CS_18_Li_SPK7.indb   21

Anl_GE_CS_18_Li_SPK7.indb   21

12.05.16   08:46

12.05.16   08:46