Вытяжки Simfer 8668 SM - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
5.3 Four Button Touch Control*
• ON&OFF:
Starts the motor.
• Speed +:
Increase the speed of the motor. Max: 3 speed.
• Speed -:
Decrease the speed of the motor. Max: 1 speed.
• Lamp:
Turns the lamp on. When the lamp is on, the dot segment is
viewed on the screen.
• Timer:
If the lamp button is pressed for 3 seconds, the device starts
flashing in respective speed. After 15 minutes the device is turned off.
• Air Cleaning:
When the air cleaning button is pressed on the
Remote Control, the function is initiated. The motor is operated for 10
minutes in 1 speed, then switches to standby for 50 minutes. While
this function is active, the screen segments start rotating. Then the
system shuts down automatically. The rotation is only for 24 hours.
• Filter Warning:
At the end of 100 hours of operation, the ‘C’ war-
ning is viewed on the screen. This warning can be deleted by pressing
the speed - button for 5 seconds, the ‘E’ is viewed on the screen, the
warning is deleted and the timer is reset. This warning is viewed for 2
seconds when on/off button is pressed. During rotation changes this
warning is not displayed.
• Automatic Shutdown:
For safety purposes, the circuit board of the
motor is programmed to provide maximum of 5 hours lighting and
maximum 10 hours of operation. When the air cleaning function is in
effect, the motor shutdown feature is turned off.
ON/OFF Button
Plus Button
Minus Button
Lamp
Timer
GB
