Novex DP 6520 S - Инструкция по эксплуатации - Страница 11

11

5.3 Four Button Touch Control*

•  ON&OFF: 

Starts the motor.

•  Speed +: Increase the speed of the motor. Max: 3 speed.
•  Speed -: Decrease the speed of the motor. Max: 1 speed.
•  Lamp: 

Turns the lamp on. When the lamp is on, the dot segment is 

viewed on the screen.

•  Timer: 

If the lamp button is pressed for 3 seconds, the device starts 

flashing in respective speed. After 15 minutes the device is turned off.
•  Air Cleaning:

  When  the  air  cleaning  button  is  pressed  on  the                

Remote Control, the function is initiated. The motor is operated for 10 
minutes in 1 speed, then switches to standby for 50 minutes. While 
this function is active, the screen segments start rotating. Then the 
system shuts down automatically. The rotation is only for 24 hours.

•  Filter Warning: At the end of 100 hours of operation, the ‘C’ warning 

is viewed on the screen. This warning can be deleted by pressing the 

speed  -  button  for  5  seconds,  the  ‘E’  is  viewed  on  the  screen,  the 

warning is deleted and the timer is reset. This warning is viewed for 2 
seconds when on/off button is pressed. During rotation changes this 
warning is not displayed.

•  Automatic Shutdown:

 For safety purposes, the circuit board of the 

motor  is  programmed  to  provide  maximum  of  5  hours  lighting  and 
maximum 10 hours of operation. When the air cleaning function is in 

effect, the motor shutdown feature is turned off.

ON/OFF Button

Plus Button

Minus Button

Lamp

Timer