Neff D86E34N0 - Инструкция по эксплуатации - Страница 4

4

Before using for the first time

Important notes:

❑

The Instructions for Use apply to several
versions of this appliance. Accordingly,
you may find descriptions of individual
features that do not apply to your 
specific appliance.

❑

This extractor hood complies with all 
relevant safety regulations.

Repairs

should be carried out by 

qualified technicians only.

Improper repairs may put the user at
considerable risk.

❑

Before using your appliance for the first
time, please read these Instructions for
Use carefully. They contain important
information concerning your personal
safety as well as on use and care of the
appliance.

❑

Please retain the operating and 
installation instructions for a subsequent
owner.

Gas hobs / gas cookers

Do not operate more than 2 gas 

cooking areas simultaneously over a period
of max. 15 minutes at maximum thermal
load.
Due to the effect of the heat there is a risk of
burns if the surfaces of the housing are
touched.

❑

Note that one large burner of more than
5 kW (Wok) is equivalent to the power of
2 gas burners.

❑

Never operate a gas cooking area 
without a cooking utensil on it. Regulate
the flame in such a way that it does not
project over the cooking utensil.

❑

This appliance is labelled
in accordance with 
European Directive
2002/96/EG concerning
used electrical and
electronic appliances 
(waste electrical and 
electronic equipment – 
WEEE). The guideline
determines the framework for the return
and recycling of used appliances as
applicable throughout the EU.

If you encounter a problem

I

If you have any questions or if a fault

occurs, please call Customer Service. 

(See list of Customer Service 
representatives).

When you call, please quote the following:

E-Nr.                       FD

Enter the relevant numbers into the box
above. The E-Nr. (product no.) and FD
(production date) are shown on the 
nameplate which can be seen inside the
extractor hood after the filter frame has
been detached.

The manufacturer of the extractor

hoods accepts no liability for complaints
which can be attributed to the design
and layout of the pipework.