MONSHER ROUEN 60 - Инструкция по эксплуатации - Страница 27

English

27

How to remove carbon filter:
1. Remove aluminum filters.
2. Turn the carbon filter to the left and pull it.
3. Replace the old carbon filter with the new one.
4. Put the filter back into place.
If necessary, clean the outside of the air cleaner with a soft, damp cloth. Do not use 

any abrasive cleaning agents. For painted stainless steel surfaces: to avoid scratching it is 
recommended to wipe them with a soft, damp cloth in the painting direction. Do not remove the 
lamp cover during the surface cleaning process.

Caution!   Do not use the steam generators for cleaning.

Caution! Not following the above rules for cleaning the appliance and replacing filters may 

cause fire.

Caution!  If you need to transport the air cleaner, first of all, disconnect it from the power 

supply and proceed with disassembly. It is recommended that you transport it in the original 

packaging. If this packaging is not available, package the appliance using materials that 

prevent possible damage resulting from transportation.

Replacing lamps

Before replacing lamps, remove the hood’s power cable. Lift 

the front glass up and remove the aluminum cartridge filter.

Then:
- Disconnect the socket and lamp connector by pulling 

back on the plastic tab as shown in the figure on the left to 
open the locking device.

- Hold the lamp by the body and turn the 2 fixing tabs on 

the lamp clockwise or counterclockwise to fit into the gaps on 
the lighting panel. After the fixing tabs line up with the gaps, 
hold the lamp by the body and remove it.