MONSHER ROUEN 60 - Инструкция по эксплуатации - Страница 24

24

3) Tighten the 2 bolts 4.8x50 YSB into the 

plugs in the wall at points A and B. Make sure 
there is a distance of 5mm between the bolt 
head and the wall.

4) Attach the chimney inner spigot strip to 

the Ø6mm wall plugs at points E and F using 
3.9x22 RYSB bolts.

5) Hang the hood by screwing it at points A 

and B, keeping a clearance of 5 mm between 
the bolt head and the wall.

6) Open the protective glass of the hood 

by pulling it towards you and remove the 
aluminum cartridge filter. Fasten the product 
by tightening the 4.8x50 YSB bolts in the 
plastic plugs on the wall in holes C and D 
visible from the inside of the product.

7) Connect the hood to an aluminum 

exhaust pipe (not included). slide the flexible 
aluminum tube onto the plastic duct adapter 
and secure it using a plastic or metal tie 
without overtightening. Insert the other end 
of the pipes into the duct hole on the wall.