Monsher Indiga 55 W - Инструкция по эксплуатации - Страница 27

27

English

INSTALLATION

The minimum distance between the supporting surface for the cooking 

equipment on the hob and the lowest part of the range hood must be not less than 
45cm from electric cookers and 50cm from gas or mixed cookers.

If the instructions for installation for the gas hob specify a greater distance, this 

must be adhered to.

ELECTRICAL CONNECTION

The mains power supply must correspond to the rating indicated on the plate 

situated inside the hood. If provided with a plug connect the hood to a socket in 
compliance with current regulations and positioned in an accessible area, after 
installation. If it not fitted with a plug (direct mains connection) or if the plug is 
not located in an accessible area, after installation, apply a double pole switch 
in accordance with standards which assures the complete disconnection of the 
mains under conditions relating to overcurrent category III, in accordance with 
installation instructions.

 WARNING! Before re-connecting the hood circuit to the mains supply 

and checking the efficient function, always check that the mains cable 

is correctly assembled. The hood is provided with a special power cable; 

if the cable is damaged, request a new one from Technical Service.

MOUNTING

Very heavy product; hood handling and installation must be carried out by at 

least two persons.

Before beginning installation:
Check that the product purchased is of a suitable size for the chosen installation 

area.

Remove the charcoal (*) filter/s if supplied (see also relative paragraph). This/

these is/are to be mounted only if you want lo use the hood in the filtering version.

Check (for transport reasons) that there is no other supplied material inside the 

hood (e.g. packets with screws (*), guarantees (*), etc.), eventually removing them 
and keeping them.