Kuppersberg INLINEA 70 X 4HPB - Инструкция по эксплуатации - Страница 6

6

TECHNICAL PASSPORT

ENGLISH

Extractor hood

Carbon  fi lter  is  designed  to  trap 

odors and fumes while cooking. It is used 
in cases where there is no possibility 
to connect the air cleaner to a special 
ventilation duct for discharging air 
outward. When operating the appliance 

with a carbon fi lter, contaminated air is 

sucked into the appliance and passes 

through a carbon fi lter, and then clean 

air is supplied to the kitchen.

The carbon fi lter should be replaced 

at regular intervals. The interval of 

fi lter  replacement  depends  on  the 

frequency of use of the air cleaner, 
style of cooking and frequency of the 

aluminum  fi lter  cleaning.  Generally,  it 

is recommended to replace the carbon 

fi lter once every 4 months.

How to remove carbon filter:

1. Remove aluminum fi lters.
2.  Turn  the  carbon  fi lter  to  the  left 

and pull it.

3. Replace the old carbon fi lter with 

the new one.

4. Put the fi lter back into place.

If necessary, clean the outside of the 

air cleaner with a soft, damp cloth. Do 
not use any abrasive cleaning agents. 
For painted stainless steel surfaces: to 
avoid scratching it is recommended to 
wipe them with a soft, damp cloth in 
the painting direction. Do not remove 
the lamp cover during the surface 
cleaning process.

Caution!

Do not use the steam generators 

for cleaning.

Caution!

Not following the above rules for 

cleaning the appliance and replacing 
fi lters may cause fi re.

Replacing lamps

Before replacing lamps, disconnect 

the appliance from the power supply. 
Then, with a screwdriver, pry and remove 
the lamp cover, while supporting it 
from below. Remove the burned-out 
lamp and replace it with a new one. 
Put the lamp cover into place, press it 

slightly and fi x it. Caution: do not touch 
the  halogen  lamp  with  your  fi ngers,  it 
signifi cantly  reduces  its  lifetime.  Use  a 

soft, dry cloth.

Caution!

If you need to transport the air 

cleaner,  fi rst  of  all,  disconnect  it 
from the power supply and proceed 
with disassembly. It is recommended 
that you transport it in the original 
packaging. If this packaging is not 
available, package the appliance using 
materials that prevent possible damage 
resulting from transportation.