Kuppersberg INLINEA 70 X 4HPB - Инструкция по эксплуатации - Страница 5

5

ENGLISH

TECHNICAL PASSPORT

Extractor hood

Mechanical control (buttons)

А – «Lighting» button

В – «0» button

С – «1» button

D – «2» button

E – «3» button

«Lighting» button – Lighting On/Off

«0» button - hood motor On/Off

«1» button - motor rotation speed 1 

(initial level)

«2» button - motor rotation speed 2

«3» button - motor rotation speed 3

S E CT I O N   2.

Mounting and dimensions

Please unpack and inspect the 

appliance! Before starting installation, 
make sure that the hood has no 
obvious transport damages. If such 
defects are detected, do not install or 
connect the appliance to the mains.

S E CT I O N  3.

Cleaning and maintenance

Caution! Before you start cleaning 

the appliance, disconnect it from the 

power supply.

Aluminum fi lter

Aluminum  fi lter  is  designed  to  trap 

grease  particles  out  of  the  fl ow  of  air 

running through it. For this reason, 

the  fi lter  needs  regular  cleaning.  The 

cleaning interval depends on the 
frequency of use of the air cleaner. 
Generally, it is recommended to clean it 
once a month.

To  do  this,  remove  the  fi lters,  wash 

them in water with a neutral liquid 
detergent, dry them, then set them back 

in the air cleaner. Over time, fi lters may 

change color due to a regular washing. 
This is a natural process, which does not 

indicate  a  defect,  so  fi lter  replacement 

is not required.

The aluminum fi lters can be washed 

in the dishwasher.

How to remove aluminum 
fi lters:

1. Press on the latch of the fi lter lock.

2. Pulling down a bit, remove the 

fi lter.

In  order  to  put  the  fi lters  in  place 

after cleaning, follow the above 
instructions in reverse order.

Carbon fi lter (used in 
recirculated air mode)

I N L I N E A  70  /  52