Kuppersberg FW 610 - Инструкция по эксплуатации - Страница 9

9

English

TEchnical passporT

Extractor hood

Replacing lamps

Before replacing lamps, disconnect the appliance from the power supply. Then, 

with a screwdriver, pry and remove the lamp cover, while supporting it from below. 
Remove the burned-out lamp and replace it with a new one. Put the lamp cover into 

place, press it slightly and fi x it. Caution: do not touch the halogen lamp with your 
fi ngers, it signifi cantly reduces its lifetime. Use a soft, dry cloth.

Caution!

If you need to transport the air cleaner, fi rst of all, disconnect it from the power 

supply and proceed with disassembly. It is recommended that you transport it in the 
original packaging. If this packaging is not available, package the appliance using 
materials that prevent possible damage resulting from transportation.

S E CT I O N  6.

Troubleshooting

Very often a malfunction of the appliance occur for minor reasons. So, before you 

call for service center, please check whether you can troubleshoot yourself. For this 
purpose please check the following possible causes of malfunctions.

Malfunction

Possible cause

Troubleshooting action

The appliance does not 

operate

...Faulty fuse

...Plug is not properly 

inserted into the outlet

. . .There is no voltage in 

the power supply system

1. Check the fuse of the 

appliance

2. Make sure that plug is 

properly inserted into the 

outlet

Suction power is not 

suffi cient

. . .Incorrect speed 

selected 

. . .Filters are clogged

1. Increase suction speed of 

hood

2. Clean or replace fi lters

The lamp is not 

lighting

...Faulty fuse

. . .The lamp is burned out 

or incorrectly installed

1. Check the fuse of the 

appliance

2. Make sure that the lamp 

is installed correctly or 

replace it