Korting KHA 7950 X Cube - Инструкция по эксплуатации - Страница 12

- 12 -

ance switches on at speed level 1,  If the cooker hood is
on depress the push-button for 2 sec. to switch off the
cooker hood.  If the cooker hood is at speed level 1 it will
not be necessary to depress the push-button to switch
the cooker hood off.  Decreases the motor speed.

Display C 

= indicates the motor speed level selected

and activates the timer.

Push-button D 

= switches on the cooker hood.  In-

creases the motor speed.  Touching the key at 3rd speed,
the intensive function runs for 10', then the appliance go
back to work at the original speed. During this function
the display blinks.

Key E 

= The Timer times the functions on activation for

15 minutes, after which they are switched off. The Timer
is deactivated by re-pressing 

Key E

. When  the Timer  is

activated the decimal point must flash on the display.
The Timer cannot be activated if the intensive speed is
functioning.

The 

“clean air” 

function is activated by pressing key 

E

for 2 seconds when the appliance is switched off. This
switches the motor on for 10 minutes every hour at the
first speed. During functioning a rotar y movement of the
peripheral  segments must be visualised on the display.
When this time has passed the motor switches off and
the fixed letter 

“C”

 must be visualised on the display

until the motor re-star ts after 50 minutes for another 10
minutes and so on. Press any key apart from the light
keys to retur n to nor mal functioning. Press key 

E

 to

deactivate the function.

• Active carbon/grease filter saturation:

- When  display  item 

C

 flashes, at a speed where it

alter nates with the letter 

F 

(e.g. 1 and 

F

), the 

grease

filters must be washed.
- When  display  item 

C

 flashes, at a speed where it

alter nates with the letter 

A 

(e.g. 1 and 

A

), the 

carbon

filters must be replaced.
After the clean filter has been positioned correctly, the
electronic memor y must be reset by pressing button 

A

for approximately 

5 seconds

, until the indication 

F

 or 

A

shown on the display 

C

 stops flashing.

• COMMANDS: ELECTRONIC 

(Fig.22A):

A

 = LIGHT

B

 = OFF/SPEED I

C

 = SPEED II

D

 = SPEED III

E

 = AUTOMATIC STOP TIMER – 15 minutes 

(*)

F

 = FILTER SATURATION RESET LIGHT

When the “filter saturation” light flashes, the anti-grease
filters must be washed. When the light comes on without
flashing, the anti-grease filters must be washed and the
carbon filters replaced (in case of operation whit the re-
cycling version). When this operation has been com-
pleted, press the key to reset it.

• COMMANDS:

(Fig.23) 

LUMINOUS 

 - (Fig.22B)

 ELECTRONIC

the key

symbols are explained below:

A

 = LIGHT

B

 = OFF

C

 = SPEED I

D 

= SPEED II

E

 = SPEED III

F 

= AUTOMATIC STOP TIMER - 15 minutes 

(*)

• 

If your appliance does not have the 

INTENSIVE

 speed

function, press key E for two seconds and it will be
activated for 10 minutes after which it will return to the
previously set speed. When the function is active the LED
flashes. To interrupt it before the 10 minutes have expired
press key 

E 

again.

•

 By pressing key 

F 

for two seconds (with the hood

switched off) the “

clean air

” function is activated. This

function switches the appliance on for ten minutes ever y
hour at the first speed. As soon as this function is acti-
vated the motor star ts up at the first speed for ten
minutes, During this time key 

F 

and key 

C 

must flash at

the same time.
After ten minutes the motor switches off and the LED of
key 

F 

remains switched on with a fixed light until the

motor star ts up again at the first speed after fifty min-
utes and keys 

F 

and 

C 

star t to flash again for ten min-

utes and so on.
By pressing any key for the exclusion of the hood light
the hood will return immediately to its normal functioning
(e.g. if key D is pressed the “

clean air

” function is deac-

tivated and the motor moves to the 2nd speed straight
away. By pressing key 

B 

the function is deactivated).

(*)

 The 

“automatic stop timer” 

delays stopping of the

hood, which will continue functioning for 15 minutes at
the operating speed set at the time this function is
activated.

• Active carbon/grease filter saturation:

- When  button 

A

 flashes at a frequency of 

2 seconds

,

the 

grease

 filters must be cleaned.

- When button 

A

 flashes at a frequency of 

0.5 seconds

,

the 

carbon

 filters must be replaced.

After the clean filter has been replaced, the electronic
m e m o r y   m u s t   b e   r e s e t   by   p r e s s i n g   bu t t o n  

A

  f o r

approximately 

5 seconds

, until the light on the button

stops flashing.

•COMMANDS:

(Fig.24A)MECHANICAL_(Fig.24B) Elliptic

the key symbols are explained below:

A

 = LIGHT

B

 = OFF

C

 = SPEED I

D 

= SPEED II

E

 = SPEED III

G 

= MOTOR  WORKING indicator

T H E   M A N U FAC T U R E R   D E C L I N E S   A L L
R E S P O N S I B I L I T Y   F O R   E V E N T UA L   DA M AG E S
CAUSED BY BREACHING THE  ABOVE  WARNINGS.