Korting KHA 4970 X Cylinder - Инструкция по эксплуатации - Страница 10

- 9 -

flashes. To interrupt it before the 10 minutes have expired
press key 

E 

again.

•

 By pressing key 

F 

for two seconds (with the hood

switched off) the “

clean air

” function is activated. This

function switches the appliance on for ten minutes ever y
hour at the first speed. As soon as this function is acti-
vated the motor star ts up at the first speed for ten
minutes, During this time key 

F 

and key 

C 

must flash at

the same time.
After ten minutes the motor switches off and the LED of
key 

F 

remains switched on with a fixed light until the

motor star ts up again at the first speed after fifty min-
utes and keys 

F 

and 

C 

star t to flash again for ten min-

utes and so on.
By pressing any key for the exclusion of the hood light
the hood will return immediately to its normal functioning
(e.g. if key D is pressed the “

clean air

” function is deac-

tivated and the motor moves to the 2nd speed straight
away. By pressing key 

B 

the function is deactivated).

(*)

 The 

“automatic stop timer” 

delays stopping of the

hood, which will continue functioning for 15 minutes at
the operating speed set at the time this function is
activated.

• Active carbon/grease filter saturation:

- When  button 

A

 flashes at a frequency of 

2 seconds

,

the 

grease

 filters must be cleaned.

- When button 

A

 flashes at a frequency of 

0.5 seconds

,

the 

carbon

 filters must be replaced.

After the clean filter has been replaced, the electronic
m e m o r y   m u s t   b e   r e s e t   by   p r e s s i n g   b u t t o n  

A

 fo r

approximately 

5 seconds

, until the light on the button

stops flashing.

T H E   M A N U FAC T U R E R   D E C L I N E S   A L L
R E S P O N S I B I L I T Y   F O R   E V E N T UA L   DA M AG E S
CAUSED BY BREACHING THE  ABOVE  WARNINGS.