Jetair Monica IX/A/60 - Инструкция по эксплуатации - Страница 22

22 

Operation 

Use the high suction speed in cases of concentrated kitchen 
vapours.  It is recommended that the cooker hood suction is 
switched on for 5 minutes prior to cooking and to leave in 
operation during cooking and for another 15 minutes 
approximately after terminating cooking.  

Model with 4 push-buttons control panel 

a. 

ON/OFF light switch 

b. 

Speed 1/OFF switch  

c. 

 2-speed selection 

d. 

3-speed selection  

Functioning - Model with display

F1 –  ON/OFF Timer (

Automatic Shut-off/Off) 

The Timer function is activated with the engine running (at any 
speed); after 5 minutes, the engine shuts down automatically. 
During the timing phase, the display (D) shows the remaining 
working time, in minutes (flashing). 
To stop the timer function, before these 5 minutes, press 
again the F1 key. 
Note: By turning off the engine manually (via F3), the timer 
function is deactivated. 

 
F2 - ON / OFF Lights

Allows turning on and off lights. 

 
F3 – Engine Speed Decrease / OFF

Decreases the speed of the engine, until it shuts off. 

 
F4 - ON / Engine Speed Increase

Enables the startup of the engine and the speed increase, 
from 1 ° to 3 °. 
 

D - Display

Allows the viewing of: 
- the motor speed status 
- the remaining time to Automatic Shut-off, when the Timer 
function is activated 
 

Functioning - Model with display 

 
T1. ON / OFF Timer (Automatic shut-off) - and – Clock 
Setting 

The timer function can be activated with the engine running (at 
any speed); after 5 minutes, the engine shuts down 
automatically. 
During the timing phase, the display (D3) displays the 
remaining working time (mm: ss). 
To interrupt the timing function, before these 5 minutes, press 
again the T1 button. 

Note

: By turning off the engine manually (via T3), the timer 

function is deactivated. 

 
Setting the clock 

The clock setting is performed through keys T1, T3 and T4 
(irrespective of lighting condition, engine or timing) 
By holding the T1 button for 3 seconds, you can enter "Clock 
Setting": 
- The hour digits will be flashing 
Press keys T3 (-) and T4 (+) to set the clock "setting NOW" 
Press again (briefly) the T1 key: 
- The minute digits will be flashing 
Press keys T3 (-) and T4 (+) to set the clock "setting 
MINUTES" 
Note: the flashing phase has a duration of 3 seconds; if the 
operator does not press any key within this time, the existing 
setting is re-stored.

T2. ON / OFF Lights

Allows turning on and off lights. 
Note: by turning on the lights, the display illuminates. 

T3.Engine Speed Decrease / OFF

Decreases the speed of the engine, until it shuts off. 

T4.

ON / Engine Speed Increase

Enables the startup of the engine and the speed increase, 
from 1 ° to 3 °.

 
 
D. display 

The display backlight is activated by turning on lights and/or 
motor. 
Hood functions display: 
D1 – function Timer ON 

D2 - Lights ON 
D3 - clock (hh: mm) / time remaining to Automatic Shut-off 
(mm: ss) 
D4 - motor on 
D5 - hood in operation: lights/motor.