Jetair Gisela IX/F/50 (PRF0099093) - Инструкция по эксплуатации - Страница 20

20 

Charcoal filter (filter version only) 

It absorbs unpleasant odours caused by cooking. 

The charcoal filter can be washed once every two months (or 
when the filter saturation indication system – if envisaged on 
the model in possession – indicates this necessity)   using hot 
water and a suitable detergent, or in a dishwasher at 65°C (if 
the dishwasher is used, select the full cycle function and leave 
dishes out). 
Eliminate excess water without damaging the filter, then put it 
in the oven for 10 minutes at 100° C to dry completely. 
Replace the mattress every 3 years and when the cloth is 
damaged. 
  
• 

Montage 

Install the carbon filter on the back of the grease filter and 
fix with two rods.    

Attention!

 The rods are included in the carbon filter 

packing and not on the hood.   

• 

To dismantle the filter act in the reverse manner. 

Replacing lamps 

Disconnect the hood from the electricity. 

Warning! 

Prior to touching the light bulbs ensure they are 

cooled down. 

1.

  Using a flat head screwdriver or equivalent tool, carefully 

pry loose the light cover.   

2.

  Remove the damaged light and replace with a new 12 

Volt, 20 Watt (Maximum) halogen light made for a G-4 
base SUITABLE FOR USE IN OPEN LUMINAIRES.  
Follow package directions and do not touch new light 
with bare hands. 

3.

  Reinstall the light  cover. (it will snap shut). 

Some models envisage lateral lamps: 

Replace them with identical forms of 40W (E14) max). 
Remove cover 

A

 to access the lamp housing 

A

. 

If the lights do not work, make sure that the lamps are fitted 
properly into their housings before you call for technical 
assistance.