Gorenje Plus GHT92X - Инструкция по эксплуатации - Страница 44

in auto ventilation mode is detected 
If possible, perform calibration in an odour-
free environment with no “cooking events” 
in progress. 
For sensor calibration, proceed as follows: 
-  press T4 for 5 seconds, with the motor 
switched off. 
Calibration will last 15 minutes with: 
- motor switched on according to speed 
 - T4 flashing; 
If calibration has been performed correctly: 
- the motor switches off 
- T4 switches off (low-intensity light) 
NB = press T4 for 5 seconds to stop 
calibration; calibration will result cancelled 
and must be repeated. 

T4 - Motor ON/OFF 

SL2 - Increase/Decrease motor speed 

- press T4 to switch on the motor 
- skim your finger to the right over the 
control to increase the motor speed

(speed 

1 --- > speed 9)

;

- skim your finger to the left over the 
control to decrease the motor 
speed

(speed 9 --- > speed 1);

- press T4 to switch off the motor 

T5 - Timing  
(intensive : speed 10) 

- press T5 to activate the timing function:  
the hood will remain at speed 10 for 5 
minutes, then it will go back to the previous 
setting;
- press T5 to deactivate the timing 
function.

T6 - Timing X2 
(intensive : speed 11) 

- press T6 to activate the timing function 
- the hood will remain at speed 11 for 5 
minutes, then it will go back to the previous 
setting;
- press T6 to deactivate the timing 
function.

T7 - Refresh function 

- press T7 to activate the refresh function 
- 50 minutes after being switched off, the 
hood switches on again automatically at 
speed 1 for 10 minutes; then it will switch 
off again.
- press T7 to deactivate the refresh 
function

NB =

 the function is active when T7 is lit 

T8 - Timer/Automatic switch off 

- press T8 to activate the function 
(manually when the hood is on - not with 
timing or auto ventilation),   

- on 

pressing once,

 the time will 

be set to switch off after 10 
minutes;
NB = the function is active when 
T8-1 is lit 
- on 

pressing twice,

 the timer 

will be set to switch off after 20 
minutes;
NB = the function is active when 
T8-2 is lit 
- on 

pressing three times,

 the 

timer will be set to switch off 
after 30 minutes;  
NB = the function is active when 
T8-3 is lit 

after selecting the desired time, release 
T8; the countdown will start after 5 
seconds.
- after the set time has elapsed, the hood 
will switch off automatically 

44