Falmec Down Draft 120 ix ECP - Инструкция по эксплуатации - Страница 21

19

3. CLEANING THE OUTSIDE OF THE APPLIANCE

It is advised to clean the external hood surfaces at least every 15 days in order to avoid that 
oily or greasy substances affect the steel surfaces. 

The ouside of the range hhod should be cleaned using a damp cloth and neutral liquid 
detergent or denatured alcohol. 

In case of fingerprint-less finish (fasteel) clean only with water and neutral soap using 
clean with a soft cloth, rinse and wipe dry thoroughly. Do not use products that contain 
abrasive substances, rough cloths or cloths specifically designed for cleaning steel. Using 
abrasive substances or rough cloths will inevitably damage the finish of steel. The steel 
surface will be irrevocably damaged if the instructions above are not complied with. Keep 
these instructions together with the instructions for use of your hood. 

The manufacturer accepts no liability for any damage caused by non-compliance with the 
instructions above. 

4.  CLEANING THE INSIDE OF THE APPLIANCE

The electrical parts or parts of the motor assembly inside the range hood must not be 
cleaned using liquids or solvents.

Do not use abrasive products.

All the above operations must be performed after having disconnected the appliance from the 
mains power supply.

SAFETY WARNINGS

M

  The electrical system features an earth connection in compliance with international safety 

standards; furthermore, it is compliant with the European standard for electromagnetic com-
patibility. 

Do not connect the appliance to flues (from boilers, fireplaces, etc.). Make sure the mains 
voltage corresponds to the values on the rating plate located inside the range hood. 

Check deep-fryers during use: superheated oil may be flammable. 
- Ensure there is adequate ventilation of the room when the rangehood is used at the same 

time as appliances burning gas or other fuels.

- Do not flambe under the rangehood
- The exhaust air must not be discharged into a flue which is used for exhausting fumes from 

appliances burning gas or other fuels.

- Ensure that all regulations concerning the discharge of exhaust air have been fulfilled before 

you use the appliance. 

  Before performing any cleaning or maintenance operations, disconnect the appliance by un-

plugging it or using the main switch. The manufacturer disclaims all liability for any damage 
that may be directly or indirectly caused to people, things and animals due to the failure to 
follow all the instructions provided in this booklet and above all the warnings relating to the 
installation, operation and maintenance of the appliance.

WARRANTY

N

The new equipment is covered by warranty.

The warranty conditions are provided by the distributor.

  The manufacturer is not liable for any inaccuracies in this booklet resulting from printing or 

transcription errors. The manufacturer reserves the right to modify its products as it consid-
ers necessary or in the interests of the user, without compromising their essential safety and 
operating characteristics.