Вытяжки Faber Infinity Almond A80 (110.0324.933) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
Controls
Button Function
Led
A
Turns the Motor off.
The Leds indicating the Speed of the motor turn off.
Enables / Disables Keyboard Lock mode if pressed and
held for 5 seconds.
All the Leds light up in cycle.
B
Activates speed one.
The Leds indicating Speed one and Motor Off turn on.
C
Activates speed two.
The Leds indicating Speed two and Motor Off turn on.
D
Activates speed three.
The Leds indicating Speed three and Motor Off turn on.
E
Activates Intensive speed. This speed is timed to run for 10
minutes. At the end of this time the system will automatically
return to the speed set before. It is disabled by pressing the
Button or turning the Motor off.
Flashes once a second.
Press and hold the button for approximately 5 seconds,
with all the loads turned off (Motor and Lights), to turn the
Activated Charcoal Filter alarm on.
To turn it off, press and hold the button again for 5 seconds.
Button A Led flashes twice.
Button A Led flashes once.
F
Starts the 24H function, in which the motor starts at a
speed that allows suction of 100 m3/h for 10 minutes per
hour. This mode cannot be activated if Intensive or Delay
modes are active.
To turn it off, press the button again.
The Leds indicating 24H speed and Motor Off turn on.
When the filters alarm is triggered, the alarm can be reset
by pressing and holding this button for approximately 5
seconds. These indications are only visible when the motor
is turned off.
When the procedure terminates, the indication shown
previously turns off:
24H Flashing
Indicates the need to wash the metal grease filters. The
alarm is triggered after the Hood has been in operation
for 100 working hours.
24H
Flashing
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in operation
for 200 working hours.
G
Activates Delay mode, with automatic shutdown of the
Motor, the Fans and the Lighting with a 30’ delay.
It is disabled by pressing the button or turning the motor off.
The Delay Led lights up.
Pressing and holding the button for 5 seconds enables the
remote control
Pressing and holding the button for 5 seconds disables the
remote control
Button A Led flashes twice.
Button A Led flashes once.
H
Press briefly to turn the lighting system on and off at
maximum intensity.
The Lighting Led lights up.
Lighting
• For replacement contact technical
support. (“To purchase contact
technical support”).
