ELICA THIN IX/A/70 - Инструкция по эксплуатации - Страница 32

32 

Note :

 after the 30 minutes, the hood will go back to the 

previously set intake speed *** 
 
with the motor on “BOOST 1”, press 

T4

 again to activate the 

intensive intake speed “

BOOST 2

”, timed 

for 7 minutes

Note :

 after the 10 minutes, the hood will go back to the 

previously set intake speed *** 

Note :

 press 

T4

 again, during the 7 minutes, to go back to the 

previously set intake speed *** 
 
with the “

BOOST1” and “BOOST2” functions active

, press: 

 
to go back to the previously set intake speed 
*** 
 

 
to go back to the 3rd intake speed 

 
*** the previous intake speed remains visible via the indicator 
LEDs 

L1 

•

if you have set the intensive speed directly with 

the hood off, the motor will be turned off. 

 
While using the “

BOOST

” functions, the 

T4

 symbol flashes : 

(  “BOOST 1” : white light - “BOOST 2” : blue light) 
 

Filter saturation indicators 

At regular intervals, the hood signals the need to perform 
maintenance on the filters. 

 LED  

(L1)

 on and flashing light (all indicator lights 

flashing together) : perform maintenance on the grease 
filter. 

 LED 

(L1)

 on and alternating light (the indicator lights 

turn on in sequence): perform maintenance on the active 
carbon filter  

 
 Note: 

The filter saturation indicator is visible within the 

first 10 seconds on turning on the hood; the saturation 
indicators must be reset within this time. 

Reset filter saturation indicator: 

Press and hold button 

 LED  

(L1)

  turns on and off (depending on the type of 

filter being reset, the indicator lights flash together or turn 
on in sequence); an acoustic signal will confirm the 
operation. 

Activation of filter saturation indicator 

 Note:

 this operation must be performed with the hood off. 

- Grease filter 

This indicator is normally activated 

1st prolonged press of buttons  

  and 

if the indicator is active, button 

 turns on 

 press 

button  , to deactivate it 

if the indicator is not active, button 

 turns on 

 press 

button  , to activate it 

- Active carbon filter 

This indicator is normally deactivated  

2nd prolonged press of buttons  

  and 

if the indicator is active, button 

 turns on 

 press 

button  , to deactivate it 

if the indicator is not active, button 

 turns on 

 press 

button  , to activate it