Elica Open Suite BL MAT/F/80 - Инструкция по эксплуатации - Страница 60

59 

Operation 
 

WiFi button 

 
•  

WiFi configuration:

 if the WiFi function 

is not configured, press for about 2 
seconds to enter WiFi configuration mode 
and follow the instructions on the App to 
complete the procedure.  
During the configuration procedure, the 
button will light up indicating the 
connectivity status (see WiFi status table) 
To interrupt the WiFi configuration 
procedure, press for about 2 seconds 
when the button is lit up and is flashing 
fast. 
Once the WiFi function has been 
configured, if you want to change it, press 
for about 6 seconds to reset the WiFi 
parameters (the button will turn off) and 
repeat the configuration procedure. 

• 

WiFi activation/deactivation: 

after the 

configuration, it is possible to 
deactivate/activate the WiFi function. 
Press for about 2 seconds to 
deactivate/activate the WiFi function. 
Deactivating the function does not cause 
the loss of the WiFi parameters. 

 
WiFi status table

Keys

Device connection 
status

Low intensity light (all 
keys) 

Wi-Fi active, not 
connected. 

White light on steady  
(Wi-Fi key only) 

Wi-Fi active, connected. 

Orange light flashing 
fast 
(Wi-Fi key only) 

Wi-Fi active, attempting to 
connect to Wi-Fi router 

White light flashing 
slowly 
(Wi-Fi key only) 

Wi-Fi active, attempting to 
connect to Elica cloud 

White light on with 
short flashing light 
(Wi-Fi key only) 

Wi-Fi active, receiving a 
remote command (e.g. 
motor or light power-on) 

 
note: with Wi-Fi configured, if there is no active function, the 

intensity of the Wi-Fi key automatically decreases. 

ON/OFF light button 

Press to turn the cooktop light on or off. 

In selected models only: 

Intensity regulation: 

With the light on, press 

and hold to adjust the light intensity. 

Tone regulation: 

With the light on, press and 

hold keys 

  and   

to adjust the light 

tone. 

"BOOST" speed selection key

 
1st press 

: Push to activate the 

high

 speed 

(suction power)

2nd press

: to activate the intensive extraction 

speed “

BOOST 

 timed 

for 5 minutes

Note:

 after the 5 minutes the hood will go 

back to the previously set extraction speed  

 
3rd press 

 (from “BOOST active) : to exit the 

function and return to the previously set 
speed. 
 

Note:

 the speed key previously set remains lit 

during BOOST operation. 

Speed selection key 2

Push to activate the 

 average

 speed (suction 

power) 

Speed selection key 1

Push to enable the 

low

 speed (suction 

power) 

PPower-off key 

If pressed while the motor is running, the 
latter will stop.

 
Filter Saturation indicator lights 

The hood signals at regular intervals that the filters must be 
serviced. 
Keys 

  and  

 lit and flashing very slowly: service the 

grease filter. 

Keys 

  and  

 lit and flashing very quickly: service the 

odour filter.

Note: 

The filter saturation warning signal is visible within the 

first 10 seconds after the hood is switched on. 

Reset filter saturation indicator: 

Press and hold the keys 

  and  

The keys will flash quickly to confirm that reset has been 

completed 

Activation of filter saturation indicators  
Note:

 this operation must be performed with the hood off. 

- Grease filter