Elica APLOMB-RS BL/A/60 - Инструкция по эксплуатации - Страница 20

19 

Timer (T4) 

The timer can be activated when the first, second or third speed is 
active. When the function is activated, both the LED of the Timer 
(

T4

) and that of the previously selected speed (

T1/T2/T3

) turn on 

with a fixed light.  
The duration of the timer depends on the selected speed: 
First speed 

T1 = duration

20’

Second speed 

T2 = duration 15’

. 

Third speed

 T3 = duration

10’

. 

When a speed is timed, the timer can be deactivated by pressing 

T4

, or one of the other two inactive speeds. To turn the hood off, 

press the speed again to which the timer had previously been 
linked. 

NOTE:

model A only

The timer cannot be activated when the booster is active. When 
the time expires, the hood turns off. When a speed is timed, it is 
possible to switch to other speeds by pressing the desired speed 
button, this operation will turn the timer off.

 
Light (T5) 

The light can be activated at any time by pressing key T5. When 
the function is activated, the LED turns on with a fixed light. 
 

Filter setting  

Activation or deactivation of the filter indicators is only possible with 
the hood off. 
To access the configuration menu, hold pressed 

T2+T3

, once 

inside the menu 

T1

 will start to flash. 

The default setting is: 



grease filter 

indicator 

(T2)

 on, therefore active; 



odour filter 

indicator 

(T3)

 off, therefore not activated. 

T2 

activates/deactivates the grease filter indicator. 

T3

activates/deactivates the odour filter indicator. To exit the menu, 
hold pressed 

T1 

or

wait 

10’’

Filter reset 

The hood signals the need for filter maintenance at regular 
intervals: 



grease filter every 

40 hours

; 



odour filter every 

160 hours

. 

In this case, with the hood off, when the user touches any button 
the interface signals two types of needs for a period of 

10’’

: 



if

 T1+T2

 flash: 

grease filter maintenance; 



if

 T1+T3 

flash

: odour filter maintenance. 

During the 10’’

it is possible to reset the grease filter by pressing 

T1+T2

 and to reset the odour filter by pressing 

T1+T3

. After the 

reset, the button combinations will flash rapidly twice. The interface 
will now work as normal.  
Please note: 
During the 10", the hood will work normally but without any visual 
feedback regarding the speed buttons. If during the 10'' no 
operations are carried out, the LEDs will stop flashing and the 
visual feedback will return to normal. 

Maintenance

Cleaning 

Clean using 

ONLY

 a cloth dampened with neutral liquid 

detergent. 

DO NOT CLEAN WITH TOOLS OR 

INSTRUMENTS

. Do not use abrasive products. 

DO NOT USE 

ALCOHOL! 

Grease filter 

Fig. 18 
Traps cooking grease particles. 

The grease filter

 must be cleaned once a month using non 

aggressive detergents, either by hand or in the dishwasher, 
which must be set to a low temperature and a short cycle.  
When washed in a dishwasher, the grease filter may discolor 
slightly, but this does not affect its filtering capacity. 
To remove the grease filter, pull the spring release handle. 

Charcoal filter (filter version only) 

Fig. 19 
 It absorbs unpleasant odors caused by cooking. 

The saturation of the 

charcoal filter

 occurs after more or less 

prolonged use, depending on the type of cooking and the 
regularity of cleaning of the grease filter. 
In any case it is necessary to replace the cartridge at least 
every four months. 
The charcoal filter may NOT be washed or regenerated. 

Circular charcoal filter 

Apply one on each side as cover to both the shield grids of the 
motor impeller, then turn clockwise. 
For the disassembly, turn counter-clockwise. 

Replacing lamps 

The hood is equipped with a lighting system based on LED 
technology. 
The LEDs guarantee an optimum lighting, a duration up to 10 
times longer than the traditional lamps and allow to save 90% 
electrical energy. 
 
For replacement, contact the technical service.