Elica 35CC DYNAMIQUE RED/F/35 - Инструкция по эксплуатации - Страница 63

63 

Panel 

Fig. 1/19 – 41/50 

Dismantling: 
pull the panel out decisively and remove it from all the 
connecting points.  
Cleaning: 
the panel should be cleaned with the same frequency as 
the fat filters, using a cloth soaked in neutral liquid 
detergents. 
Avoid the use of products containing abrasives. DO NOT 
USE ALCOHOL!  
Montage: 
The panel should be fixed between the pins placed for 
this reason on the surface of the hood.  
Attention!  Always check that the panel is fixed in its 
place well. 

 
Grease filter 

Fig. 2/18 - 42/49 
Traps cooking grease particles.  
The grease filter must be cleaned once a month using non 
aggressive detergents, either by hand or in the dishwasher, 
which must be set to a low temperature and a short cycle.  
When washed in a dishwasher, the grease filter may discolour 
slightly, but this does not affect its filtering capacity. 
To release and remove the grease filter grip on the two side 
handles. 

Charcoal filter (filter version only) 

Fig. 17 / 48 
It absorbs unpleasant odours caused by cooking. 
The saturation of the charcoal filter occurs after more or less 
prolonged use, depending on the type of cooking and the 
regularity of cleaning of the grease filter. 
In any case it is necessary to replace the cartridge at least 
every four mounths. 
The charcoal filter may NOT be washed or regenerated. 
Circular carbon filter 
Apply one on each side as cover to both the shield grids of the 
motor impeller, then turn clockwise. 
For the disassembly, turn counter-clockwise. 

Replacing lamps 

The hood is equipped with a lighting system based on LED 
technology. 
The LEDs guarantee an optimum lighting, a duration up to 10 
times as long as the traditional lamps and allow to save 90% 
electrical energy. 
 
For replacement, contact the technical service.