AEG DTB5660HM - Инструкция по эксплуатации - Страница 6

www.aeg.com

6

5.

 CONTROLS

The hood is 

fi

 tted with a control panel with 

aspiration speed selection control and a 
light switch to control cooking area lights.
Use the high suction speed in cases 
of concentrated kitchen vapours.  It is 
recommended that the cooker hood suction 

is switched on for 5 minutes prior to cooking 
and to leave in operation during cooking 
and for another 15 minutes approximately 
after terminating cooking. 
The control switches are located on the 
unit’s front panel:

T6

1

T2 T3

T4

T5

T6

T7 T8

T9

2

3

4

5

6

7

8

9

 1 

  Speed ON/OFF button 

Control panel on/off key

 2 

  Suction speed (power) key 1:

 3 

  Suction speed (power) key 2:

 4 

  Suction speed (power) key 3:

 5 

  Suction speed (power) key 4:

 Note: 

suction speed (power) key 4 has 

a limited duration of 5 minutes, after 
which the previous suction speed is 
reactivated.

 6 

  "Breeze" function key

(Room ventilation)

The hood switches on at low suction 
speed (power) for 60 minutes, after 
which it switches off.

 7 

  Filter saturation control and 

activation/deactivation key

 8 

 Hob2

H

ood function indicator 

 9 

  Lights ON/OFF key

Control panel on/off function

With the hood in standby, press key 

 1 

, all 

led lights will switch off: the control panel 
is off.
Press key 

 1 

 again, all led lights will turn 

on: the control panel is active.

Carbon 

fi

  lter saturation control activation/

deactivation function

With the hood in standby, press key 

 5 

 for 

longer than 3 seconds
Key 

7 

 will 

fl

 ash to indicate that the carbon 

saturation 

fi

 lter has been activated.

Key 

7 

 will remain lit to indicate that 

the carbon saturation 

fi

 lter has been 

deactivated.

Filter saturation control and reset 
function

At regular intervals and depending on 
the hood temperature, key 

 7 

 lights 

up to indicate that the 

fi

 lters need to 

be maintained in accordance with the 
instructions in the relative paragraphs.
Key 

 7 

 on with a 

fi

 xed light: maintenance is 

required on the grease 

fi

 lters

Key 

 7 

 on and 

fl

 ashing: maintenance is 

required on the carbon 

fi

 lter.

Filter saturation indicator reset

With the hood in standby, press key 

 7 

 for 

longer than 3 seconds.
Repeat the operation if necessary.

Downloaded from 

www.Manualslib.com

manuals search engine