AEG DTB5660HM - Инструкция по эксплуатации - Страница 3

3

ENGLISH

combustion devices or other fuels.  The hood must be 

regularly cleaned on both the inside and outside (AT LEAST 

ONCE A MONTH).  This must be completed in accor  dance 

with the maintenance instructions provided in this manual. 

Failure to follow the instruc tions provided in this user guide 

regarding the cleaning of the hood and 

fi

 lters will lead to the 

risk of 

fi

 res.  The 

fl

 aming of foods beneath the hood itself is 

severely prohibited.

1.

SAFETY INSTRUCTIONS

The use of exposed 

fl

 ames is detrimental 

to the 

fi

 lters and may cause a 

fi

 re risk, 

and must therefore be avoided in all 
circumstances. 
Any frying must be done with care in order 
to make sure that the oil does not overheat 
and ignite.

 CAUTION: 

Accessible parts of the 

hood may become hot when used with 
cooking appliances.

For lamp replacement use only lamp type 
indicated in the Maintenance/Replacing 
lamps section of this manual.

 WARNING! 

Do not connect the 

appliance to the mains until the 
installation is fully complete. 

With regards to the technical and safety 
measures to be adopted for fume 
discharging it is important to closely follow 
the regulations provided by the local 
authorities.
The ducting system for this appliance must 
not be connected to any existing ventilation 
system which is being used for any other 
purpose such as discharging exhaust fumes 
from appliances burning gas or other fuels. 
Do not use or leave the hood without the 
lamp correctly mounted due to the possible 
risk of electric shocks.
Never use the hood without effectively 
mounted grids.
The hood must NEVER be used as 
a support surface unless speci

fi

 cally 

indicated.
Use only the 

fi

 xing screws supplied with the 

product for installation or, if not supplied, 
purchase the correct screws type.
Use the correct length for the screws which 
are identi

fi

 ed in the Installation Guide.

In case of doubt, consult an authorised 
service assistance centre or similar 
quali

fi

 ed person. 

 WARNING! 

Failure to install the 

screws or fixing device in accordance 
with these instructions may result in 
electrical hazards.

2.

USE

The hood serves to aspirate the fumes and 
vapors resulting from cooking.
The attached installation manual indicates 
the version to be used depending on the 
model you have, the suction version with 

external evacuation

or 

fi

 ltering with 

internal recirculation

.

3.

INSTALLATION

The mains power supply must correspond 
to the rating indicated on the plate situated 
inside the hood. If provided with a plug 
connect the hood to a socket in compliance 
with current regulations and positioned in 
an accessible area, after installation. If it not 

fi

 tted with a plug (direct mains connection) 

or if the plug is not located in an accessible 
area, after installation,  apply a double 
pole switch in accordance with standards 
which assures the complete disconnection 
of the mains under conditions relating to 
over-current category III in accordance with 
installation instructions.

Warning!

Before re-connecting the hood 

circuit to the mains supply and checking 
the efficient function, always check that 
the mains cable is correctly assembled.

Downloaded from 

www.Manualslib.com

manuals search engine