AEG DL6250-ML - Инструкция по эксплуатации - Страница 10

10 

EN - Instruction on mounting and use  

Closely follow the instructions set out in this manual. 

All 

responsibility,  for any eventual inconveniences, damages or 
fires caused by not complying with the instructions in this 
manual, is declined. The extractor hood has been designed 
exclusively for domestic use. 

  Caution 

WARNING! 

Do not connect the appliance to the mains until 

the installation is fully complete.  
Before any cleaning or maintenance operation, disconnect 
hood from the mains by removing the plug or disconnecting 
the mains electrical supply.  
Always wear work gloves for all installation and maintenance 
operations. 
The appliance is not intended for use by children or persons 
with impaired physical, sensorial or mental faculties, or if 
lacking in experience or knowledge, unless they are under 
supervision or have been trained in the use of the appliance 
by a person responsible for their safety. 
This appliance is designed to be operated by adults, children 
should be monitored to ensure that they do not play with the 
appliance. 
This appliance is designed to be operated by adults.  Children 
should not be allowed to tamper with the controls or play with 
the appliance. 
Never use the hood without effectively mounted grating! 
The hood must NEVER be used as a support surface unless 
specifically indicated. 
The premises where the appliance is installed must be 
sufficiently ventilated, when the kitchen hood is used together 
with other gas combustion devices or other fuels.  
The ducting system for this appliance must not be connected 
to any existing ventilation system which is being used for any 
other purpose such as discharging exhaust fumes from 
appliances burning gas or other fuels.  
The flaming of foods beneath the hood itself is severely 
prohibited. 
The use of exposed flames is detrimental to the filters and 
may cause a fire risk, and must therefore be avoided in all 
circumstances.  
Any frying must be done with care in order to make sure that 
the oil does not overheat and ignite. 
Accessible parts of the hood may became hot when used with 
cooking applicance. 
With regards to the technical and safety measures to be 
adopted for fume discharging it is important to closely follow 
the regulations provided by the local authorities. 
The hood must be regularly cleaned on both the inside and 
outside (AT LEAST ONCE A MONTH). 
This must be completed in accordance with the maintenance 
instructions provided in this manual). Failure to follow the 
instructions provided in this user guide regarding the cleaning 
of the hood and filters will lead to the risk of fires. 
Do not use or leave the hood without the lamp correctly 
mounted due to the possible risk of electric shocks. 
We will not accept any responsibility for any faults, damage or 

fires caused to the appliance as a result of the non-
observance of the instructions included in this manual. 
This appliance is marked according to the European directive 
2002/96/EC on Waste Electrical and Electronic Equipment 
(WEEE). By ensuring this product is disposed of correctly, you 
will help prevent potential negative consequences for the 
environment and human health, which could otherwise be 
caused by inappropriate waste handling of this product. 

The symbol 

 on the product, or on the documents 

accompanying the product, indicates that this appliance may 
not be treated as household waste. Instead it should be taken 
to the appropriate collection point for the recycling of electrical 
and electronic equipment. Disposal must be carried out in 
accordance with local environmental regulations for waste 
disposal. 

Use 

The hood is designed to be used either for exhausting 

or filter version 

. 

Installation 

The minimum distance between the supporting surface for the 
cooking equipment on the hob and the lowest part of the 
range hood must be not less than 60cm from electric cookers 
and 65cm from gas or mixed cookers. 
If the instructions for installation for the gas hob specify a 
greater distance, this must be adhered to. 
The mains power supply must correspond to the rating 
indicated on the plate situated inside the hood. If provided with 
a plug connect the hood to a socket in compliance with current 
regulations and positioned in an accessible area, after 
installation. If it not fitted with a plug (direct mains connection) 
or if the plug is not located in an accessible area, after 
installation,  apply a double pole switch in accordance with 
standards which assures the complete disconnection of the 
mains under conditions relating to over-current category III, in 
accordance with installation instructions. 

Warning!

 Before re-connecting the hood circuit to the mains 

supply and checking the efficient function, always check that 
the mains cable is correctly assembled. 

Moving the control panel 
Fig. 2a 

The control panel can be moved to another place! 
(for example on the front panel of the wall unit) 
For this uninstall the grease filter and the support frame. 

1.

  Remove two screws and extract the control panel from its 

seat 

Disconnect the plug connection. 

Attention:

 The movable connection of the cable is 

enough for a distance of just 

40 cm

. 

2.

  Open the passage of the cable on the upper side of the 

hood and insert the cable of the control unit into the 
orifice. Then reconnect the anti-tear device.