Makita DUB184Z - Инструкция по эксплуатации - Страница 5

5 ENGLISH

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN50636-2-100:

Work mode: operation without load

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

Cordless Blower Safety Instructions

WARNING:

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

Training

1. 

Read the instructions carefully. Be familiar 

with the controls and the correct use of the 

blower.

2. 

Never allow children, persons with reduced 

physical, sensory or mental capabilities or 

lack of experience and knowledge or people 

unfamiliar with these instructions to use the 

blower. Local regulations may restrict the age 

of the operator.

3. 

Never operate the blower while people, espe-

cially children, or pets are nearby.

4. 

Keep in mind that the operator or user is 

responsible for accidents or hazards occurring 

to other people or their property.

Preparation

1. 

Always wear substantial footwear and long 

trousers while operating the blower.

2. 

Do not wear loose clothing or jewellery that 

can be drawn into the air inlet. Keep long hair 

away from the air inlets.

3. 

Always wear protective goggles to protect 

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in 

the USA, EN 166 in Europe, or AS/NZS 1336 

in Australia/New Zealand. In Australia/New 

Zealand, it is legally required to wear a face 

shield to protect your face, too.

It is an employer's responsibility to enforce 

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

4. 

To prevent dust irritation the wearing of a face 

mask is recommended.

5. 

While operating the machine, always wear non-

slip and protective footwear.

 Non-skid, closed-toed 

safety boots and shoes will reduce the risk of injury.

Operation

1. 

Switch off the blower and remove the battery 

cartridge and make sure that all moving parts 

have come to a complete stop

• 

whenever you leave the blower.

• 

before clearing blockages.

• 

before checking, cleaning or working on 

the blower.

• 

if the blower starts to vibrate abnormally.

2. 

Operate the blower only in daylight or in good 

artificial light.

3. 

Do not overreach and keep proper balance and 

footing at all times.

4. 

Always be sure of your footing on slopes.

5. 

Walk, never run.

6. 

Keep all cooling air inlets clear of debris.

7. 

Never blow debris in the direction of bystanders.

8. 

Operate the blower in a recommended position 

and on a firm surface.

9. 

Do not operate the blower at high places.

10. 

Never point the nozzle at anyone in the vicinity 

when using the blower.

11. 

Never block suction inlet and/or blower outlet.

• 

Be careful not to block suction inlet or 

blower outlet with dust or dirt when oper-

ating in dusty area.