Timberk T-WSE80-FS1D-V - Инструкция по эксплуатации - Страница 27

Водонагреватели Timberk T-WSE80-FS1D-V - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 64
Загружаем инструкцию
background image

 

                                                                                                                                                               IM2021 

27 

 

2.  The  main  socket  must  be  designed  for  rated  current  of  at  least  10A  and  electric 
cable with core cross section of at least 3x1.5 mm

2

 (for copper). 

 
3. The plug and socket must be kept dry to avoid electrical leakage.  
 

NOTE! 

Install  the  electric  socket  in  places  or  on  walls  that  may  be  splashed  with  water  at  a 
height of at least 1.8 m. 
 
Make  sure  that  the  electric  plug  is  tightly  connected  to  the  socket  on  a  regular  basis. 
Check  it  as  follows:  insert  the  electric  plug  into  the  socket,  turn  off  the  water  heater 
after  30  minutes  of  operation  and  remove  the  plug  from  the  socket;  check  with  your 
hand  whether  the  plug  is  hot.  If  the  plug  is  hotter  than  50 

°C,  replace  the  socket  to 

avoid  damage,  accidents,  or  fire  due  to  poor  electrical  contact.  Checks  must  be 
conducted by a specialist. 
 

RCD (residual current device)

 

not included in the delivery package. 

 

1. Connect the power cord to the electric main; the indicator (1) will come on.  
2. Press button (2)  to test,  voltage  will not be applied,  the  indicator (1)  will turn  off and 
the reset button (3) will go up. 
3.  To  restart,  press  button  (3),  voltage  will  be  applied  again  and  the  indicator  (1)  will 
come on. 
 

 

NOTE! 

- if voltage is not disconnected and/or the indicator (1) does not turn off once you press 
the test button (2), the RCD does not work properly. 
-  if voltage  is not connected and/or  the indicator (1)  does not come on once  you press 
the reset button (3), the water heater does not work properly. In either case, disconnect 
the water heater and call the service center. 
- to reduce the risk of electrocution, do not disassemble, remove or pour liquid into the 
product. 
 

 
 
 
 
 
 
 

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Timberk T-WSE80-FS1D-V?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"