PHILIPS AWH1620/51(30YC) - Инструкция по эксплуатации - Страница 15

13

Operating mode selection

Press  the  «Mode»  button  to  select  one 

of the three operating modes of the 

device:  normal  mode,  «OptimalTEMP», 

«Turbo».  When  the  «OptimalTEMP»  and 

«Turbo»  indicators  are  off,  this  is  the 

normal operation mode, you can adjust 

the temperature and select the power 

mode.  Pressing  the «Mode»  button  again 

will  turn  on  the  «OptimalTEMP»  mode, 

in which a fixed temperature of 55 ° C is 

set and the average power mode  Press 

«Mode»  again  to  select  «Turbo»  mode. 

This mode has a fixed temperature of 

75 °C and an intensive power mode  In 

the  «OptimalTEMP»  and  «Turbo»  modes, 

the temperature and power adjustment 

buttons do not work 

Indicators:

The water heater automatically maintains the 

set temperature 

«Heat»

  -  the  indicator  lights  up  when  the 

water in the tank is being heated 

«Warm» 

-  the  indicator  lights  up  during  heat 

saving, when there is no heating 

During heating, water may start to drip 

from the opening of the safety valve  

Water leakage cannot be avoided and 

must not be prevented, since blocking the 

valve can lead to rupture of the internal 

tank (in the event of an equipment failure) 

Attention!

Shutdown

To  turn  off  the  water  heater,  press  the  «On/

Off»  button.  The  water  heater  will  stop 

working, the screen will display the time and 

the internal temperature of the water 

It is recommended to always disconnect the 

water heater from the mains if you do not 

plan to use the appliance for some time 

Setting the time and timer

1.  With  the  water  heater  off,  press  the 

«Mode»  button  to  set  the  time.  The  time 

display  “00”  will  flash  on  the  screen.  Set 

the desired hour with button   or     

Press the «Mode» button again to set the 

minute time 

2.  Press  «Mode»  again  to  set  the  timer  to 

turn on the water heater  At this time, the 

indicator   will light up on the screen  

Set the desired hour with button   or   

.  Then  press «Mode»  again  and  enter  the 

minute time settings  After the setting 

process is completed, the indicator   

will turn off, the set time is automatically 

saved 

3   To set the timer for heating when the 

water heater is on, hold down the 

“Settings” button for 3 seconds  In the 

same way, using button   or   , set the 

desired heating start time  The water 

heater will work in heat saving mode and 

heating will start when the set time is 

reached  After heating is completed, the 

appliance  will  return  to  the  heat-saving 

mode  To disable this function, hold the 

«Settings» button for 3 seconds.